Viking PB100 Emergency Phone Polling & Diagnos

The PB100 hardware and software provides inexpensive PC to Telephony applications on an open source basis and makes it easy to create your own application solutions using standard programming languages such as Microsofts Visual Basic. Applications such as message announcement centers, voice dialers and auto attendants may easily be created to your custom specifications.

The PB100 accepts simple ASCII serial commands to seize the phone line, dial or decode DTMF Touch Tones, watch for busy signal, detect loop status, perform timed hook-switch flashes or hang-up the line. If your PC is equipped with a sound card, the audio ports can also be coupled to the phone line through the PB100 for voice recording or playing announcements using standard file formats such as .wav files.

The PB100 hardware features a serial port interface, an AUDIO IN and AUDIO OUT port, an analog C.O. line interface and an analog phone port. Several pre-written applications are included and can be installed for use. In addition, all available source code is provided to allow changes or improvements to existing programs.

UPC: 615687221619
Also known as: VK-PB100

Technical Specifications: Power: 120V AC/12V DC 500mA, UL listed adapter provided Dimensions: 127mm x 127mm x 25mm (5" x 5" x 1.5") Software/Hardware Requirements: IBM Compatible personal computer with an available serial port CD-rom drive, and Windows compatible sound card, Windows: 95 or 98 (with OLE32 updates), NT 4.0 (service pack 6 or higher ), 2000 (service pack 2 or higher), 5MB of hard drive space and 8MB of free physical RAM P.C. Interface: 9-pin RS-232 (cable included) Environmental: 0C to 32C (32F to 90F) with 5% to 95% noncondensing humidity Weight: 1.36 kg (3 lbs.)

For more information about the Viking Electronics PB100, please contact us.