Veracity VHW-HWPS-C4 HIGHWIRE Powerstar Quad
-
MPN: VHW-HWPS-C4
-
JMAC ID: 200729144
HIGHWIRE Powerstar Quads unique ultra low-power design and efficient power delivery enables long range Ethernet over coax. It works even over the lowest grade cable, such as the highresistance, copper-clad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confidence, while a quick check of the SafeView power level display reaffirms that the device connections will continue to be reliable, whatever the cable used. For predictable network operation with no restrictions, HIGHWIRE technology delivers a full 200Mbit/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax.
The QUAD variant of HIGHWIRE is designed for the camera end of the coax and, with an integrated four-port POE switch, enables connection of up to four IP cameras over a single coax. With no need to configure IP addresses, set DIP switches, or make awkward measurements and calculations, installing HIGHWIRE Powerstar QUAD is simple. The Base end of the coax is driven by single-channel, 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The QUAD unit can be powered either by POE over coax, delivering a maximum total POE power budget of 25 watts, or by one of the optional local PSUs, delivering 40 or 78 watts. HIGHWIRE Powerstar Quad features Veracitys unique SafeView display, to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.
UPC: 892314002654
Also known as: VCI-VHWHWPSC4, VHWHWPSC4
For more information about the Veracity VHW-HWPS-C4, please contact us.
The QUAD variant of HIGHWIRE is designed for the camera end of the coax and, with an integrated four-port POE switch, enables connection of up to four IP cameras over a single coax. With no need to configure IP addresses, set DIP switches, or make awkward measurements and calculations, installing HIGHWIRE Powerstar QUAD is simple. The Base end of the coax is driven by single-channel, 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The QUAD unit can be powered either by POE over coax, delivering a maximum total POE power budget of 25 watts, or by one of the optional local PSUs, delivering 40 or 78 watts. HIGHWIRE Powerstar Quad features Veracitys unique SafeView display, to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.
UPC: 892314002654
Also known as: VCI-VHWHWPSC4, VHWHWPSC4
Technical Specifications:
|
For more information about the Veracity VHW-HWPS-C4, please contact us.
- Instantly check connection and power level with SafeView
- Compatible with all HIGHWIRE Powerstar Base units (1, 4 & 8ch)
- Eliminates separate power cabling with POE-over-Coax
- Integrated 4-port POE switch (POE Plus with local power option)
- Re-uses existing coax cable for up to 4 IP cameras or devices
- 100BaseTX performance over 300m of RG59 (500m on RG11)
- Completely automatic connection, no configuration required