Veracity VHW-HWPS-C2 HIGHWIRE Powerstar Duo
-
MPN: VHW-HWPS-C2
-
JMAC ID: 200729143
HIGHWIRE Powerstar Duo makes the most of your legacy cabling and multiplies its capability by connecting two IP cameras or other network devices. HIGHWIRE Powerstar Duos unique ultra low-power design and efficient power delivery enables long range Ethernet over coax. It works even over the lowest grade cable, such as the high-resistance, copper-clad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confidence, while a quick check of the SafeView power level display reaffirms that the device connections will continue to be reliable, whatever the cable used.
For predictable network operation with no restrictions, HIGHWIRE technology delivers a full 200Mbit/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax. The DUO variant of HIGHWIRE is designed for the camera end of the coax and, with an integrated two-port POE switch, enables connection of two IP cameras over a single coax. With no need to configure IP addresses, set DIP switches, or make awkward measurements and calculations, installing HIGHWIRE Powerstar Duo is simple. The Base end of the coax is driven by single-channel, 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The DUO unit can be powered either by POE over coax, delivering a maximum total POE power budget of 25 watts, or by one of the optional local PSUs, delivering 40 or 78 watts. HIGHWIRE Powerstar Duo features Veracitys unique SafeView display, to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.
UPC: 892314002647
Also known as: VCI-VHWHWPSC2, VHWHWPSC2
For more information about the Veracity VHW-HWPS-C2, please contact us.
For predictable network operation with no restrictions, HIGHWIRE technology delivers a full 200Mbit/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax. The DUO variant of HIGHWIRE is designed for the camera end of the coax and, with an integrated two-port POE switch, enables connection of two IP cameras over a single coax. With no need to configure IP addresses, set DIP switches, or make awkward measurements and calculations, installing HIGHWIRE Powerstar Duo is simple. The Base end of the coax is driven by single-channel, 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The DUO unit can be powered either by POE over coax, delivering a maximum total POE power budget of 25 watts, or by one of the optional local PSUs, delivering 40 or 78 watts. HIGHWIRE Powerstar Duo features Veracitys unique SafeView display, to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.
UPC: 892314002647
Also known as: VCI-VHWHWPSC2, VHWHWPSC2
Technical Specifications:
|
For more information about the Veracity VHW-HWPS-C2, please contact us.
- Re-uses existing coax cable for 2 IP cameras or devices
- Instantly check connection and power level with SafeView
- Completely automatic connection, no configuration required
- 100BaseTX performance over 300m of RG59 (500m on RG11)
- Compatible with all HIGHWIRE Powerstar Base units (1, 4 & 8ch)
- Eliminates separate power cabling with POE-over-Coax
- Integrated 2-port POE switch (POE Plus with local power option)