Vanco EVRX3001 Evolution HDMI Receiver Over Cat5e/Cat6 Cable

The Evolution by Vanco EVRX3001 HDMI over Single Cat5e/6 Receiver with Bi-directional IR and EQ management receives high definition video and audio signals and IR, at a distance of up to 131ft/40m over a single Cat5e/6 cable when utilized with an Evolution by Vanco standard matrix unit or splitter over single Cat5e/6. Features EQ management, which allows for fine tuning video quality for seamless integration. The result is an easy and flexible installation with low maintenance. With only one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances. Deep color video, DTS-HD or Dolby TrueHD audio, and HDCP is supported and compatible with the EVRX3001. In addition, EVRX3001 is also equipped with bi-directional IR pass-through which allows for source or display control.

The EVRX3001 receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals from any standard Evolution by Vanco matrix unit or splitter transmitting HDMI signals over a single Cat5e/6 cable. The EVRX3001 offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application.

UPC: 741835100335
Also known as: ZX-EVRX3001

Technical Specifications: HDMI source control: Controllable via IR pass-through from RX to standard matrix unit or splitter and from standard matrix unit or splitter to RX with IR extenders Relative humidity: 20-90% RH (no condensation) Storage temperature: 4 - 140 degrees F Operation temperature: 32-104 degrees F Power consumption: 1.5 Watts Power supply: 5V 2A DC Fixedness: Wall-mounting case with screws Housing: Metal enclosure Rotary control switch: Signal Level Equalization 3.5mm connector: IR Receiver/ IR blaster RJ45 connector: WE/SS 8P8C with 2 LED indicators Min DIN connector: DIN-9 HDMI connector: Type A 19 pin female In/Out: 1xDIN9 Output: 1xHDMI + 1x3.5mm Input: 1x RJ-45 + 1x3.5mm IR pass-thru: Full-duplex bi-directional PCB stack-up: 4 layer board (impedance control - differential 100, single 50 ESD protection: (1) Human body model +/- 19kV (air-gap discharge) & (contact discharge) (2) Core chipset - +/- 8k V Input DDC Signal: 5 Volts (peak to peak, TTL) Input TMDS Signal: 1.2 Volts (peak to peak) Equalization: 8-level digital control at RX Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio HDMI over UTP: Full HD (1080p)-40m (130ft) [CAT.X]; HD (720p/1080i)-50m (165ft) [CAT.X] Video Support: 480i/480p/720p/1080i/1080p @60 Video Bandwidth: Single-link 225MHz [6.75Gbps] HDCP Compliance: Yes HDMI Compliance: HDMI Deep Color, Full 3D

For more information about the Vanco EVRX3001, please contact us.