Vanco EVRC5002 Evolution HDMI EDID Sync Recorder

The Evolution by Vanco EVRC5002 HDMI EDID Recorder is an EDID Reader/Writer/Retimer that has the ability to emulate EDID (Extended Display Identification Data) information. For use in applications where EDID issues are occurring. Features the ability to set EDID from the main unit or from a connected computer using the included software. Controllable via USB, the EVRC5002 stores and recalls EDID information from either source or display and supports HDCP. The EVRC5002 saves time from troubleshooting and having to replace equipment. This EDID management allows and encourages source and display handshake, a perfect solution for compatibility issues.

Extended Display Identification Data (EDID) is a standard data format that contains basic information about the display and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, frequency range limits, and character strings for the monitor name and serial number.

The information is stored in the display and is used to communicate with the system through a Display Data Channel (DDC). The system uses this information for configuration purposes, so the monitor and system can work together.

UPC: 741835100465
Also known as: ZX-EVRC5002

Technical Specifications: Relative humidity: 20-90% RH (no condensation) Storage temperature: -4 - 140 degrees F Operation temperature: 32-104 degrees F Power consumption: 4 Watts (max) Power supply: 5V 2A DC Fixedness: Wall-mounting case with screws Housing: Metal enclosure Flash EEPROM: 256 byte (non-volatile) USB connector: mini USB HDMI connector: Type A 19 pin female Output: 1x HDMI Input: 1x HDMI Video Support: Up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz] Video Bandwidth: Single-link 225MHz [6.75Gbps] HDCP Compliance: Yes DVI/HDMI Compliance: DVI 1.1/HDMI Deep Color and 3D

For more information about the Vanco EVRC5002, please contact us.