Uplink 5500M AV Universal 5G-Ready, Dual SIM, LTE-M Cellular Alarm Communicator
-
MPN: 5500M-AV
-
JMAC ID: 202539474
The Uplink 5500M-AV is a 5G-ready, dual-SIM LTE-M cellular alarm communicator designed for primary or backup alarm reporting in compatible security and remote monitoring systems. It supports Verizon and AT&T cellular networks, four programmable digital inputs, two transistor outputs, and Contact ID or SIA central station reporting. Operating at 12-15 VDC, the compact communicator provides smartphone-based remote arming and disarming, push and email notifications, and remote device management through the Uplink Dealer Portal and Installer App.
Uplink 5500M-AV Dual-SIM LTE-M Cellular Alarm Communicator with Verizon and AT&T Connectivity
The Uplink 5500M-AV Cellular Alarm Communicator provides wireless alarm event transmission for compatible intrusion security systems and remote monitoring applications. Designed for primary or redundant cellular alarm communications, the device uses LTE Category M1 (LTE-M) technology with dual-SIM connectivity across Verizon and AT&T networks. Its compact design allows installation alongside existing alarm control equipment, providing an alternative to traditional telephone-line reporting. The 5500M-AV is a summary event communicator that processes alarm conditions through its four digital inputs rather than providing full event-by-event dialer capture. It supports residential and commercial intrusion alarm installations, equipment monitoring, industrial control systems, and other applications requiring reliable transmission of monitored status changes to a central station or authorized user.
The 5500M-AV incorporates four digital inputs and two configurable transistor outputs for connections to compatible alarm panels, sensors, and external control equipment. Its inputs can monitor siren or bell activity, including steady burglary signals and pulsed fire signals, allowing the communicator to distinguish configured alarm conditions. The device supports Contact ID and SIA central station reporting formats, with additional event notifications delivered through smartphone push alerts and email. The outputs provide remote control capabilities, including supported keyswitch-based arming and disarming of compatible intrusion panels. Through the Uplink smartphone application, authorized users can monitor connected system status and activate configured output functions. The communicator requires appropriate alarm panel programming, wiring, and an active Uplink cellular service subscription to transmit events and support remote services.
The Uplink 5500M-AV operates from a 12-15 VDC power source and is designed to obtain power from a compatible alarm panel with sufficient auxiliary capacity. Manufacturer specifications identify a 15 mA standby current and 200 mA peak current consumption, supporting installations where power budgeting is important. Its LTE Category M1 cellular radio operates across 700, 850, 1700, 1900, and 2100 MHz frequency bands, with dual-SIM connectivity providing access to supported Verizon and AT&T networks. An integrated status LED indicates network registration, cellular signal conditions, and active data transmission. Installers can evaluate connectivity and configure reporting through the Uplink Installer App or secure Dealer Portal, which supports device registration, account management, and remote configuration. The 5500M-AV is marketed as 5G-ready but communicates using LTE-M cellular technology rather than a conventional 5G NR radio.
The 5500M-AV measures approximately 2.50 inches high, 3.55 inches wide, and 1.26 inches deep (63.5 90.2 32 mm) and weighs approximately 2.65 ounces without its antenna. The manufacturer specifies a 3-foot antenna cable, with a 10-foot cable available as an option, allowing installers to position the antenna for improved cellular reception. Designed for indoor environments, the communicator operates from 32 F to 120 F (0 C to 49 C) with relative humidity from 0-85% non-condensing. Beyond intrusion alarm applications, the 5500M-AV can monitor equipment such as generators, mechanical chillers, freezers, sewer lift stations, and industrial control systems through appropriately configured digital inputs. Its dual-network capability, centralized event reporting, remote output control, and compact construction make it suitable for new installations and cellular communication upgrades. Installers should verify panel compatibility, available power, antenna placement, service activation, and applicable security or fire alarm communication requirements before commissioning.
UPC: 850045443016
For more information about the Uplink 5500M-AV, please contact us.