Home > GE Security > Intrusion & Property Management > Wireless Controls & Devices >

UTC Interlogix (Formerly GE Security/Caddx) TX-1010-01-1 DesignLine Slim Door/Window Sensor, White
TX-1010-01-1 UTC (Formerly GE Security/Caddx) | JMAC Supply
 

Our Price: $41.50


Product Code: UTC-GE-CADDX-TX-1010-01-1
Discontinued, Call For Replacement

Description Product Resources
 

UTC Interlogix (Formerly GE Security/Caddx) TX-1010-01-1 DesignLine Slim Door/Window Sensor, White


  • Also known as: TX1010011, CA-TX1010011, GES-TX1010011

  • Using the DesignLine Door/Window Sensor, alarm systems can be easily installed and provide the highest level of intrusion protection available for a home or business. These sensors monitor doors, windows, cabinets or anything that opens and closes.

    Almost any building can be set up with an Interlogix system because of the DesignLine Door/Window Sensors small size and flexible mounting configurations.

    The DesignLine Door/Window Sensor provides years of trouble free operation because advanced circuit technology makes this sensor extremely efficient and reliable. The low current draw, coupled with a high-capacity lithium battery, means five to eight years between battery changes when sensors are used on low-traffic openings.

    The wire-free nature of DesignLine Door/Window Sensors means: less installation cost; less installation damage from drilling holes and pulling wires; less time spent on premises for the installer; and less compromise to security due to the inflexibility of sensor location when using hardwire sensors.
    Features:
    • Color: White
    • Low Profile Design Gives Sleek Modern Look; Fits in Any Home or Business
    • Wireless Technology is Easier and Less Costly to Install; Safer because of Flexible Placement
    • Advanced Circuit Technology Supplies Robust Function w/Low Current Draw
    • Compatible w/All Interlogix 319.5 MHz Control Panels and Receivers
    • Functions at Open-air Distances of Up to 500'
    • Runs on Lithium Coin Cell Battery w/Typical Life of 5 Years
    • Tamper-resistant Case Inhibits Tampering and Improves Security and Durability
    • External Contact Header Allows Connection of an External Hardwire Contact


    Technical Specifications:

    • Battery: Panasonic CR2032, 3VDC, 225mAh, Lithium Coin Cell
    • Battery life: 5 years (typical)
    • Transmitter frequency: 319.508MHz (crystal-controlled)
    • Transmitter frequency tolerance: +/- 8 kHz
    • Bandwidth: 24 kHz
    • Modulation type: Amplitude Shift Key (ASK)
    • Unique ID codes: 16 million
    • Peak field strength: Typical 30,000 uV/m @ 3m
    • External input sampling current: 20 uA
    • Magnetic sensitivity of reed switch: 10 to 20 amp turns
    • Reed sensitivity: .38-in. (.97-cm) gap
    • Magnet type: Nd-Fe-B, N45
    • Sensor dimensions (WxHxD): 1 x 2.44 x 0.35 in. (25.4 x 61.98 x 8.89mm)
    • Supervisory interval: 64 minutes
    • Operating temperature: 10F~120F (-12C~49C)
    • Enclosure: PC-540
    • Weight: 0.55 oz (15g)
    • Magnet dimensions (WxHxD): 0.43 x 1.3 x 0.31 in. (10.92 x 33.02 x 7.87mm)


    UPC: 782136723489

    Average rating: 5.0, based on 2 reviews


    For more information about the UTC (Formerly GE Security/Caddx) TX-1010-01-1, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    GE Security > Intrusion & Property Management > Wireless Controls & Devices
    GE Security
    GE Security > Intrusion & Property Management
    UTC (Formerly GE Security/Caddx)