Trine 4800F-32D 4800F 3/4" Thick Fire Rated Surface Mount Strike
-
MPN: 4800F-32D
-
JMAC ID: 200576249
The Trine 4800F-32D is a Grade 1 fire-rated surface-mounted electric strike designed for rim panic exit devices with a 3/4-inch or greater latchbolt throw. Featuring a satin stainless steel (630/US32D) finish, over 3,000 lbs of holding force, and more than 1.5 million tested operating cycles, it provides electrically controlled access for commercial single-door openings. The strike supports 12/24VDC operation, includes Trine's patented four-pin anchoring system, and carries a 3-hour fire rating for approved fail-secure installations.
Trine 4800F-32D Grade 1 Fire-Rated Rim Panic Electric Strike
The Trine 4800F-32D Electric Strike is a heavy-duty, surface-mounted electric locking device engineered for commercial doors equipped with rim panic exit hardware. Part of Trine's AXION 4800F Series, this model features a 3/4-inch-thick strike body with a satin stainless steel (BHMA 630/US32D) finish and accommodates compatible rim exit devices with a minimum 3/4-inch latchbolt throw. Its open-cavity design provides clearance for latchbolts extending up to approximately 1 inch, depending on the installed spacer configuration and exit device geometry. Designed for installation on compatible wood or metal single-door frames, the 4800F-32D allows authorized electronic unlocking while retaining the mechanical exit device's normal interior egress operation. Applications include commercial offices, educational facilities, institutional buildings, and access-controlled entrances requiring compatible fire-rated door hardware.
The 4800F-32D incorporates a one-piece locking mechanism operated by a single solenoid, reducing mechanical complexity while providing reliable electrical release. The manufacturer specifies more than 3,000 lbs of holding force and over 1,500,000 tested operating cycles, with performance meeting Grade 1 electric strike requirements. The current enhanced low-current design supports 12VDC at 0.218A, 16VDC at 0.290A, and 24VDC at 0.195A, with intermittent or continuous-duty operation as specified by Trine. Built-in electrical protection supports integration with compatible access control power supplies, while the field-selectable operating mechanism allows the installer to choose fail-secure or fail-safe behavior. In fail-secure mode, the strike remains locked when power is removed and releases when energized; fail-safe mode releases the strike upon power loss.
Designed for rim exit device electrification and commercial access control integration, the Trine 4800F-32D works with appropriately configured card readers, keypads, access control panels, and remote release switches. Its surface-mounted construction provides an alternative to recessed electric strike installation where extensive frame modification is undesirable. The strike includes Trine's patented four-pin anchoring system, which reinforces attachment to the door frame and helps maintain alignment under demanding operating conditions. Supplied spacer plates accommodate differences in latchbolt projection and frame geometry, while the open strike cavity supports the larger latchbolt throws associated with rim panic hardware. Proper operation requires a compatible door closer, correct latch-to-strike alignment, and adequate clearance to prevent preload against the releasing mechanism.
The Trine 4800F-32D is designed for approved 3-hour fire-rated single-door and frame assemblies when installed in the manufacturer's fire-listed fail-secure configuration. Manufacturer-documented standards include UL 10C, NFPA 252, UBC 7-2, CAN4-S104, UL 1034, and UL 294, along with Grade 1 performance testing for electric strikes. The strike measures approximately 9 inches high, 1-3/4 inches wide, and 3/4 inch deep, according to Trine's dimensional drawing. It features two mounting points spaced 8-1/4 inches apart and accepts the supplied installation hardware and anchoring pins. The fire listing does not apply when configured for fail-safe operation, making proper electrical function selection essential for fire-rated openings. Manufactured in the United States and identified by Trine as qualified under Buy American Act and Build America, Buy America requirements, the 4800F-32D provides a durable electrified locking solution for compatible rim panic exit devices.
UPC: 822786010260
Also known as: 4800F32D
Technical Specifications:
|
For more information about the Trine 4800F-32D, please contact us.
1 Review
-
TRINE-4800F-32D