Takex TX-124R Battery Operated Flame Sensor

30m (66ft) Outdoor Battery Operated Flame Sensor for Wireless Systems.

Wires are no longer necessary - substantially reduce installation costs!

High sensitivity flame sensor with ultra-low current consumption plays a crucial role for wireless fire-watching systems.

UPC: 100000901878
Also known as: PU-TX124R, TX124R

Technical Specifications: Supplied accessories: Tapping screw ∅6 x 30: 4pcs, Battery holder (2 x CR-123A): 1pc, Area mask seal: 1pc Appearance: Sensor part: PC resin (white), Bracket: AES resin (white) Weight: Approx. 510g (17.9oz) Installation: Indoor/outdoor Ambient temperature: -20°C to +50°C (-4°F to +122°F) Operation LED: Detection: Red LED, Real time + delay time 2 sec. Detection output: (Blue/White wires), Solid State Switch N.C, 3VDC 0.01A max., Output when detecting ultraviolet, Real time + delay time 2 sec Current consumption: Standby: 55μA max. / Detection: 1mA max. Supply voltage: (Red/Black wires) DC3V (CR-123A) Sensitivity adjustment: Sensitivity: H (100%), L (50%) (selectable), Detection timer: 1sec, 6sec, 15sec, 30sec (selectable) Detection area: Distance - 10m (33ft) max. (Gas flame of lighter in front of sensor approx. 7cm flame), 30m (100ft) max. (N-heptane flame on fire plate 15cm x 15cm approx. 60cm); Angle - Horizontal: approx. 100 degrees (60 degrees downward), Vertical: approx. 75 degrees (15 degrees upward); Adjustment range - Horizontal 180 degrees by base unit, Vertical 90 degrees Detection system: Ultraviolet rays detection (detected wave length 180~260nm)

For more information about the Takex TX-124R, please contact us.