Takex PA450PI Passive Infrared Sensor

• High RFI and EMI immunity
• Photo MOSFET relay for silent operation
• Equipped with tamper and auto-reset memory
• Adjustable coverage pattern to suit different mounting heights
• Mode selector for easy setting adjustment

• Detection system: Passive infrared
• Coverage: Wide angle: 11m (36ft) max.
• Sensitive zone: 29 pairs
• Supply voltage: 10 to 18VDC (non-polarity)
• Current consumption: 25mA max.
• Alarm output: Dry contact (semi-conductor) (NO/NC selectable), Reset: approx. 2 sec, 24V, 0.25A max., (Protective resistor 3.3)
• Tamper output: 0.1A, 30V (NC)
• Alarm LED (Red): Blinking at warm-up, Lighting at alarm (LED disabled), Blinking at memory activated (3 min), Lighting at memory indication (47 min)
• Coverage adjustment: Vertically 3 steps
• Pulse count: 2/4 selectable
• Alarm memory: 3 mins blinking, 47 mins lighting (automatically reset)
• Low voltage notice: Dry contact alarm
• Ambient temperature: -15C to +55C (+5F to +131F) without condensation
• Mounting position: Indoor use only (ceiling mount with optional BCW-401)
• Weight: 120g (4.2oz)
• Appearance: Body: ABS resin, Lens: PE resin