Securitron TS-5-CBO TSB-3 Replacement Sensor Board

  • MPN: TS-5-CBO
  • JMAC ID: 200733949
$117.00
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200733949
df_manual_boost:
2.20

The Securitron TS-5-CBO is a replacement touch sensor circuit board for Securitron TSB Series Touch Sense Bars, designed to restore touch-activated request-to-exit operation on electronically secured doors. Compatible with TSB-3 Series touchbars and designed to replace earlier TS-3 and TS-4 sensor boards, it operates at 12 or 24 VDC with a current draw of 40 mA at rest and 25 mA during release. Its electronic touch-sensing circuitry provides adjustable sensitivity and relay-based lock release when an occupant touches the connected exit bar.

Securitron TS-5-CBO Replacement Touch Sensor Board for TSB Exit Bars

The Securitron TS-5-CBO is a replacement electronic touch sensor circuit board designed for compatible Securitron TSB Series Touch Sense Bars used in commercial electronic access control and request-to-exit applications. Manufactured by Securitron, an ASSA ABLOY Group brand, the TS-5-CBO restores the electronic sensing function that allows a TSB exit bar to detect contact from an approaching occupant and initiate release of an electrically secured door. The replacement board is designed for TSB-3 Series Touch Sense Bars and supersedes earlier TS-3 and TS-4 touch sensor boards, providing a service replacement for compatible existing installations. It is suitable for maintenance and repair of touch-sensitive exit devices installed in offices, commercial buildings, educational facilities, healthcare properties, and other controlled entrances using electromagnetic door locks. Unlike a complete Securitron TSB exit device, the TS-5-CBO consists of the internal replacement sensor electronics and is intended for installation within an existing compatible touchbar assembly.

The TS-5-CBO incorporates electronic touch-sensing circuitry that responds when a person contacts the conductive surface of the connected TSB exit bar. When touch is detected, the sensor changes the state of its internal relay contacts to signal the connected electric locking equipment or request-to-exit circuit. In a properly configured electromagnetic locking installation, this response interrupts lock power through the approved release arrangement, allowing the door to open. The sensor includes field-adjustable touch sensitivity, enabling technicians to calibrate detection response according to the installation environment and touchbar configuration. The TSB system also incorporates a separate mechanical backup release switch that provides an additional method of initiating the door release when the bar is pressed. This redundant release function is part of the complete TSB assembly and should not be confused with a mechanical switch included on the replacement circuit board. The sensor's relay connections can also support compatible access control request-to-exit signaling when wired according to Securitron's installation instructions.

The Securitron TS-5-CBO operates from a 12 or 24 VDC low-voltage power source, making it compatible with the electrical requirements of supported Securitron Touch Sense Bar installations. Manufacturer TSB specifications identify a current draw of approximately 40 mA during the normal secured condition and 25 mA during the release condition. The circuitry includes a relay-operated output arrangement and an adjustable sensitivity control used during commissioning and troubleshooting. The sensor is designed for integration with the existing touchbar wiring, electrical connections, and associated locking equipment. The complete TSB system uses a sensing circuit connected to the conductive bar surface, allowing physical contact to initiate an electronic release signal without requiring the occupant to apply substantial mechanical force. Securitron's TSB installation documentation also describes diagnostic procedures involving the sensor's indicator LED, relay operation, electrical supply, and touch sensitivity adjustment. These features allow maintenance personnel to identify problems associated with sensor calibration, wiring, or electronic release operation before replacing additional door security hardware.

The TS-5-CBO is intended for service replacement and maintenance of existing Securitron Touch Sense Bar request-to-exit assemblies. Its circuit board design allows a compatible TSB unit to be repaired without replacing the complete aluminum touchbar, mounting hardware, or door power transfer assembly. The manufacturer confirms compatibility with earlier TS-3 and TS-4 sensor board generations, although technicians must verify the installed bar model and wiring arrangement before replacement. The associated Securitron TSB system is designed for 12/24 VDC indoor operation at temperatures from 32 F to 110 F (0 C to 43 C) and is not intended for installations exposed directly to rain. Securitron identifies the TSB Series as ANSI/UL 294 listed for access control system applications, with additional approvals documented for complete Touch Sense Bar assemblies. The TS-5-CBO should be installed in accordance with the manufacturer's wiring instructions and applicable access-controlled egress requirements, including verification that the electric lock releases correctly when the sensor or independent backup switch is activated. Securitron advertises its MagnaCare lifetime replacement warranty for eligible products, subject to the manufacturer's current coverage terms. Combining adjustable touch sensitivity, low-current dual-voltage operation, relay-based release signaling, and compatibility with earlier TSB sensor designs, the TS-5-CBO provides a replacement component for maintaining touch-activated egress functionality in compatible commercial access control installations.



UPC: 0784607041986
Also known as: TS5CBO

Technical Specifications:
  • Country Of Origin: USA
  • BAA Qualified: Yes
  • Fire Rated: No
  • Certifications & Standards: UL Listed
  • Product Type: Replacement Touch Sensor Board
  • Additional Information: Country of origin: United States. Country of origin is subject to change.
  • Compatibility: Securitron TSB-3 Series Touchbars
  • Limited Warranty: 1 Year
  • Country of Origin: United States
  • Series: Securitron Exit Devices


For more information about the Securitron TS-5-CBO, please contact us.

1 Review

  • 5
    SECURITRON-TS-5-CBO

    Posted by 100038 on Jun 25th 2016

Live Chat