Securitron SMSS Surface Mount Hanging Strike, Shear
-
MPN: SMSS
-
JMAC ID: 200043691
The Securitron SMSS is a stainless steel surface-mount strike housing designed for the Securitron SAM Shear Aligning Magnalock. It allows the magnetic lock's strike armature to be installed on the door surface when concealed mortise mounting is impractical. Measuring 12.40 x 2.13 x 1.45 inches, the housing includes a mounting bracket, protective cover, and installation hardware for compatible wood, aluminum, and hollow metal doors. Its satin stainless steel finish and surface-mount configuration support specialized commercial access control installations.
Securitron SMSS Stainless Steel Surface-Mount Strike Housing for SAM Magnalock
The Securitron SMSS Surface-Mount Strike Housing provides an alternative mounting solution for the Securitron SAM Shear Aligning Magnalock in commercial electronic access control applications. Designed specifically for the magnetic lock's strike armature, the SMSS allows installers to surface-mount the strike assembly instead of recessing it into the door. This configuration accommodates door constructions where conventional mortise installation is impractical because of structural limitations, door geometry, or existing hardware arrangements. The assembly features a satin stainless steel finish and a two-piece housing consisting of a mounting bracket and protective cover. When properly installed with compatible SAM hardware, the bracket supports the required alignment between the strike armature and electromagnetic lock body. The SMSS is part of Securitron's specialized SAM mounting accessories and can be used independently or alongside the SMLS Surface-Mount Lock Housing when both components require surface installation.
The SMSS strike mounting assembly measures approximately 12.40 inches long, 2.13 inches wide, and 1.45 inches high (314.9 x 54.1 x 36.8 mm), according to Securitron's published installation specifications. Its stainless steel construction and satin finish provide a durable mounting surface and a finished appearance for commercial door installations. The standard U.S. hardware package includes one lock/strike mounting bracket, one matching bracket cover, three 1/4-20 UNC x 1-1/2-inch button-head socket cap screws, two 1/4-20 UNC steel blind nuts, and two 1/4-20 UNC x 1-inch steel sex bolts. These components accommodate different mounting requirements for solid-core, wood, aluminum, and hollow metal doors. The mounting bracket also includes an optional center mounting location for installations requiring an alternative fastening arrangement. The SMSS is a mechanical mounting accessory without electronic circuitry, magnetic components, or independent locking capability. Its function is to secure the separately supplied SAM strike armature in the correct position relative to the magnetic lock.
The Securitron SMSS supports surface installation on wooden, solid-core, aluminum, and hollow metal doors using the mounting methods specified by Securitron. For wooden and solid-core applications, installers secure the bracket using two 1/4-20 sex bolts inserted through corresponding 3/8-inch (9.5 mm) mounting holes. Hollow metal and aluminum installations support either through-bolt mounting or blind-nut attachment, depending on the door construction and available mounting surfaces. Blind-nut mounting uses three 3/8-inch holes drilled through the mounting face of the door, while sex-bolt installation requires two holes extending through the door assembly. Once the bracket is secured, the SAM strike armature attaches using the mounting hardware supplied with the magnetic lock. The protective cover then slides over the bracket and is secured with the appropriate fasteners. Correct positioning and mechanical alignment are necessary to maintain the intended shear-lock engagement and holding performance of the complete SAM Magnalock assembly.
Designed for commercial offices, institutional buildings, controlled entrances, and specialized electronic locking applications, the SMSS provides installation flexibility for doors that cannot accommodate a concealed SAM strike assembly. Its surface-mounted construction allows the strike armature to be secured externally while maintaining compatibility with the manufacturer's specified shear-lock mounting arrangement. The matching Securitron SMLS Surface-Mount Lock Housing is available separately for installations requiring the electromagnet itself to be mounted on the door frame surface. The SMSS is also available in a metric hardware configuration designated SMSSM, providing an alternative fastening arrangement for installations using metric mounting hardware. Securitron supports the SMSS with its MagnaCare lifetime replacement, no-fault warranty, subject to manufacturer terms. The housing does not include the SAM Magnalock or strike armature, and it has no independent voltage, current, or holding-force rating. Installation must follow the Securitron SMLS/SMSS Installation Instructions (500-12400), including mounting surface preparation, fastening requirements, armature alignment, and applicable access control and life safety regulations.
UPC: 784607028772
Also known as: SN-SMSS, HES-SMSS
Technical Specifications:
|
For more information about the Securitron SMSS, please contact us.
- Permits the SAM magnet, strike or both to be surface mounted when mortising is not possible
- For specialty applications
- Stainless Steel
2 Reviews
-
SECURITRON-SMSS
-
SECURITRON-SMSS