Home
Shop by Brands
Seco-Larm
Wireless
Receivers
Seco-Larm SK-910R3Q 3-Channel RF Receiver, Code-Hopping with Shunt/Momentary Operation

Seco-Larm SK-910R3Q 3-Channel RF Receiver, Code-Hopping with Shunt/Momentary Operation

MPN: SK-910R3Q
JMAC ID: 200214468

$46.00

JMAC_ID:: 200214468
df_manual_boost:: 1.75

Please Note: In order to keep our prices low, we have a minimum order requirement of $99

Product Resources

SK-910R3Q Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

The SK-910R3Q is a wireless receiver that meets the growing demand for multi-channel receivers with multiple and independently controlled output modes. RF receivers can be used to control a variety of home automation devices such as garage door openers, lights, motorized gates, lifts, or other devices remotely. These receivers are compatible with both fixed code and code hopping transmitters. Code hopping transmitters, such as SECO-LARM CODEBUMP transmitters, change codes every time transmitter sends a signal for extra security.

UPC: 676544014218
Also known as: SL-SK910R3Q, SK910R3Q

Technical Specifications:

Size: 5-5/16"x-315/16"x1-1/8" (135x100x27.5 mm)
Receiver Outputs: Three Form "C" dry relay contacts (NO/NC/COM); rated 10A@24VDC
Weight: 3.5-oz (100g)
Case Construction: High-impact ABS plastic
Receiver Output Modes: Programmable independent outputs: timed momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.), toggle (ON/OFF), latched, continuous
Number of Stored Transmitter Codes: 15 per channel, 45 per receiver
Coded Channels: Three
RF Codes: 18 quintillion, for ENFORCER CODEBUMP remotes. 68 billion, for ENFORCER fixed-code remotes
Transmitter Compatibility: Fixed-Code Models (SK-919 Series), CODEBUMP Models (SK-917T Series)
Data Format: PWM
Sensitivity: -87dBm (typical)
Current Drain: ~12mA@12VDC (standby), 50mA@12VDC per channel activated
Operating Temperature: -4º~162º F (-20º~72º C)
Operating Distance: Up to 500' (150m)
Operating Voltage: 11~24V AC/DC
Operating Frequency: 315MHz (433.92MHz also available by request)

For more information about the Seco-Larm SK-910R3Q, please contact us.

3 Separate Channels / 4 Output Modes Each: a. Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.); b. Toggle (On/Off); c. Latch (Output stays on until manually reset); d. Continuous or Validity (Output for as long as signal is received)
Use to control home automation functions, garage door openers, house lights, alarm control panels, motorized gates, lifts or other devices by remote control.
Uses either fixed code or code hopping transmitters with up to 500ft (150m) range using standard antenna.
Easily Code-learns up to 15 remotes per channel.
Stores codes safely in EEPROM for up to one year in case of power loss.
Three Form-C Dry Relay Contact (NO/NC/COM) Outputs. Each output rated 10 Amps at 24 VDC.
External extended range antenna optional. Plugs directly into receiver PC Board. If the SECO-LARM ENFORCER SK-91ERSD (Dipole Antenna) is used, range will be up to 1000ft (300m).
Operating Frequency 315MHz (433MHz - 433.92MHz also available by request)
Mode switch for easy transmitter learning.
Patented CODEBUMP anti-codegrabbing technology (requires use of CODEBUMP transmitter).