Home
Shop by Brands
Seco-Larm
Access
RequesttoExit
Seco-Larm SD-9263-KSVQ No Touch Request-to-Exit Plate, Adjustable Delay Timer, Outdoor, Single Gang, English, Manual Override

Seco-Larm SD-9263-KSVQ No Touch Request-to-Exit Plate, Adjustable Delay Timer, Outdoor, Single Gang, English, Manual Override

MPN: SD-9263-KSVQ
JMAC ID: 200100362

$71.00

JMAC_ID:: 200100362
df_manual_boost:: 1.90

Please Note: In order to keep our prices low, we have a minimum order requirement of $99

Product Resources

SD-9263-KSVQ Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

The ENFORCER Outdoor No Touch Request-To-Exit Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since it is No Touch, this sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

UPC: 676544011842
Also known as: SL-SD9263KSV, SD9263KSVQ

Technical Specifications:

Output Time: 0.5~20 s, toggle
LEDs: Standby - Red, Triggered - Green
Response Time: 10mS
Relay Type: Form C dry contact, 1A@30VDC
Current Draw: Standby - 16mA@12VDC / 25mA@24VDC, Triggered - 20mA@12VDC / 32mA@24VDC
Operating Voltage: 12~24 VDC
Dimensions: 4-1/2" x 2-3/4" x 1-1/2" (115x70x39mm)
Range: 2"~7" (5~18cm)
Weight: 125g
Operating Temperature: -4°~131° F (-20°~55° C)
IP rating: IP65

For more information about the Seco-Larm SD-9263-KSVQ, please contact us.

Single Gang
Weather-resistant (IP65) for outdoor use.
Clean and simple no-touch operation reduces the risk of cross-contamination.
Manual override button functions without electricity in case of power failure.
Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated.
1A relay, adjustable trigger duration 0.5~20 seconds.
Stainless-steel plate, available in slimline or single-gang.
Adjustable sensor range up to 7" (18cm).