Seco-Larm E-960-D190Q ENFORCER Twin Photobeam Detectors with Laser Beam Alignment, 190ft (60m) Outdoors, 390ft (120m) Indoors

The Seco-Larm E-960-D190Q ENFORCER Twin Photobeam Detectors with Laser Beam Alignment adds reliable perimeter security to your home with a laser system that allows for easy installation. Because no trenching or wiring is involved in the installation process, a substantial reduction in labor costs and installation time can be expected.

These detectors can be set up to 590 feet (180 m) apart indoors or up to 290 feet (88 m) apart outside. Detector includes lens optics to reinforce beam strength and provide immunity to false alarms due to rain or snow mist. The photoelectric beam lens can be adjusted horizontally 90 degrees, and vertically 5 degrees. This allows much flexibility in terms of how the transmitter and receiver can be mounted. A typical installation arrives at a distance of 32 to 39 inches (80 to 100 cm) above the ground for most situations. Similar to most SECO-LARM products, they are made for both indoor and outdoor use. They are weatherproof and come in a sunlight-filtering case.

UPC: 676544000822
Also known as: SL-E960D190Q, E960D190Q

Technical Specifications: Case: PC Resin Weight: 2.47-lb (1.12kg) Operating temperature: -13º~+131º F (-25º~+55º C) Alignment angle: Horizontal (+/-)90º, Vertical: (+/-)5º Laser output power: 5mW. Laser wavelength: 650nm. Operation LED: Green LED (transmitter and receiver) ON: When power is applied. Tuning LED: Yellow LED (Receiver) ON: When alignment is successful Alarm LED: Red LED (Receiver) ON: When an alarm is initiated Tamper output: NC. switch, 1A@120VAC Alarm output: NO./NC. relay, 1A@120VAC Interrupt speed: 50msec~700msec (variable) Detection method: Simultaneous break of 2 beams Power: 10~30VAC/VDC (Non-polarized) Current: 62mA Max Range: Outdoor - 190' (60m); Indoor - 390' (120m)

For more information about the Seco-Larm E-960-D190Q, please contact us.