Seco-Larm DR-116-1.0TQ ENFORCER Series H.264 Network Digital Video Recorder, 16-Channel Audio/Video, 480PPS, 1TB HDD

The ENFORCER DR-1 series of Network H.264-based DVRs are designed to be used with almost any CCTV system. Using H.264 compression allows for more data to be stored on either one or two SATA hard drives (available at most electronics stores; one hard drive comes pre-installed on select DVR models). The DR-1 series are Network DVRs, allowing access over the Internet to view live video or stored contents remotely.


Also known as: DR11610TQ, DR11610TQ

Technical Specifications: Remote operation: Monitoring, playback, recording, system setup, dome camera control, archiving Remote control software: Mac, Java, CMS, IE 6/7/8 Weight: 10-lb (4.5kg) Video VGA output: 800x600, 1024x768, 1280x1024 pixels Video Outputs: Main monitor - BNCx1, 1.0Vp-p, 75Ω, Call Monitor - BNCx1, 1.0Vp-p, 75Ω Video Operating system: Embedded Linux Video loss detection: Programmable Video Inputs : BNCx16, 1.0Vp-p, 75Ω Video HDMI output: 1024x768, 1280x1024, 1920X1080 pixels USB: 2x USB 2.0 (Exporting, USB Mouse) Storage mode: Linear/Circular RS-485: D-Sub Relative humidity: 10%~90% Non-condensing Recording resolution & rate - NTSC 720x480 - Max. 120PPS, 720x240 - Max. 240PPS, 360x240 - Max. 480PPS; PAL - 720x576 - Max. 100PPS, 720x288 - Max. 200PPS, 360x288 - Max. 400PPS Recording quality: 8 Presets levels, adjustable Recording modes: Continuous, schedule, alarm, motion detection Pre-alarm: Yes Power Adapter: AC 100~240V, 50-60Hz, 60W adapter (included) Operating temperature: 32°~104° F (0°~40° C) Network connectivity: RJ-45, 10/100Mbps Ethernet, static IP, DHCP, PPPoE, and DDNS Motion detection: 16x12 Grid array, sensitivity, trigger level adjustable Mobile viewing: iPhone, Android, Windows Mobile, Symbian, BlackBerry IR Remote: Yes Image size: 1kB to 22kb/Picture HDD Capacity: 2TB Export: USB 2.0 Port - Supports flash, DVD/RW drive or external USB HDD Dome camera control protocol: Pelco P, Pelco D, AD422, Fastrax 2, Panasonic, GE, DSCP, JVC Data lifetime: Yes (Programmable) Compression method: H.264 Built-in storage interface: 2x SATA (4TB max.) Audio Outputs: Main audio - RCAx1, Line-out, Call Audio - RCAx1, Line-out Audio Input: D-Sub, Line-in Audio Data rate: 8kb/s Per channel Alarm relay output: x1, D-Sub, 1.0A@30VDC Alarm input: x16 via, D-Sub (TTL) Alarm detection: NO/NC, Programmable Dimensions (WxHxD): 11-3/4"x2-1/8"x14" (300x54x256 mm)

For more information about the Seco-Larm DR-116-1.0TQ, please contact us.