Schlage RC15 Single-Gang Multi-Tech IP Reader Controller
-
MPN: RC15
-
JMAC ID: 202444055
The Schlage RC15 is a single-gang, multi-technology IP reader controller that combines credential authentication and door access control in one network-connected device. Supporting 125 kHz proximity cards, 13.56 MHz smart credentials, Bluetooth, and NFC mobile credentials, it provides flexible authentication for commercial security systems. The RC15 uses Power over Ethernet (PoE), supports up to 64,000 locally stored credentials, and integrates with compatible physical access control software, including Pure Access Cloud.
Schlage RC15 Multi-Technology IP Reader Controller with PoE and Mobile Credential Support
The Schlage RC15 single-gang IP reader controller combines credential reading, access decisions, and door control functions into one network-connected device for commercial and institutional access control systems. Built on Schlage Pure IP technology, the RC15 connects directly to an Ethernet network and supports 125 kHz proximity credentials, 13.56 MHz smart cards, Bluetooth Low Energy (BLE), and NFC mobile credentials. This multi-technology architecture allows facilities to maintain existing proximity card systems while transitioning to smart cards or mobile access credentials. Designed for single-gang wall mounting, the RC15 is suitable for office buildings, educational facilities, healthcare properties, and controlled-access entrances requiring centralized security management.
The RC15 supports 10/100 Mbps Ethernet connectivity, TLS 1.2 encrypted communications, and IEEE 802.3af Class 0 Power over Ethernet, combining network communication and electrical power through a single cable. It also accepts regulated 10-13 VDC input, while 24 VDC operation is not supported. In local mode, the controller stores up to 64,000 credentials, 5,000 events, 32 time schedules, and 32 holidays, allowing access decisions to continue without an active host connection. Host mode provides real-time access decisions and event management through compatible access control software. The unit measures 5.13 inches high, 3.25 inches wide, and 1 inch deep, weighs approximately 8.1 ounces, and operates from -31 F to 151 F (-40 C to 66 C).
The Schlage RC15 Pure IP reader controller provides three configurable inputs for door position monitoring (DPS), request-to-exit (REX), and auxiliary devices (AUX), along with a 12 VDC output rated at a maximum of 600 mA. An integrated accelerometer provides tamper detection, while configurable red, amber, and green LED indicators and an audible signal communicate reader status. The controller supports compatible MIFARE smart credentials, including MIFARE Classic and DESFire technologies, along with supported Schlage and third-party proximity credentials. Installation and commissioning are performed through the Schlage ENGAGE mobile application, with an Advanced Security Module (ASM) available to relocate lock-control connections to the secure side of an exterior opening.
The Schlage RC15 wall-mounted access control reader integrates with compatible open physical access control systems (PACS), including ISONAS Pure Access Cloud, and can operate within an access control environment that also manages Schlage NDE and LE wireless locks. The controller carries UL 294/cUL listings and an IP65 environmental protection rating, supporting installations in interior and exterior environments when installed according to manufacturer requirements. Additional certifications include FCC, IC, CE, and RoHS 3. Its standard black housing supports single-gang mounting, while optional C1 and C2 covers provide replacement housing configurations. Unlike the Schlage RCK15, the RC15 does not include an integrated keypad. Compatible power supplies, locking hardware, and software integrations must be verified before installation.
UPC: 812951020583
Also known as: 6S-RC15
Technical Specifications:
|
For more information about the Schlage RC15, please contact us.