Schlage MT11 Multi-Technology Mullion Access Card Reader

  • MPN: MT11
  • JMAC ID: 202165352
$264.97
Discontinued Item, Limited Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
202165352
df_manual_boost:
2.20

The Schlage MT11 is a mullion-mounted multi-technology access control reader designed to support both 125 kHz proximity credentials and 13.56 MHz contactless smart cards. Compatible with Schlage, HID, MIFARE Classic, and MIFARE DESFire credentials, it also supports compatible NFC mobile access solutions. Featuring Wiegand communication, 5-16 VDC operation, IP65 environmental protection, and UL 294 certification, the MT11 provides a migration path from legacy proximity cards to smart credentials while maintaining compatibility with existing access control systems.

Schlage MT11 Multi-Technology Mullion Access Control Reader

The Schlage MT11 Multi-Technology Mullion Reader provides contactless credential authentication for commercial access control systems using both legacy proximity cards and modern smart credential technologies. Designed for installation on narrow door mullions, aluminum storefront frames, and other restricted mounting surfaces, the MT11 combines 125 kHz proximity and 13.56 MHz smart card reading capabilities in a compact housing. The reader supports Schlage proximity credentials, HID proximity cards, GE/CASI ProxLite, AWID, LenelProx, Schlage MIFARE Classic, and MIFARE DESFire EV1, EV2, and EV3 technologies, along with compatible third-party smart card serial numbers. It also accommodates supported Schlage NFC mobile credentials, enabling facilities to incorporate smartphone-based access without replacing their existing reader infrastructure. Its open architecture makes the MT11 suitable for commercial offices, educational institutions, healthcare facilities, government buildings, and multi-tenant properties transitioning toward smart credential access control.

The MT11 operates on a 5-16 VDC linear power supply and draws approximately 100 mA average current and 170 mA peak current at 12 VDC. Its compact PBT polymer enclosure measures 5.91 inches high by 1.72 inches wide by 0.81 inches deep and weighs approximately 5.7 ounces. Credential reading distances vary by technology, with 125 kHz proximity cards supported at distances up to 5 inches, MIFARE Classic credentials up to 4 inches, MIFARE Plus up to 1 inch, and MIFARE DESFire EV1/EV3 up to 2 inches. The reader supports ISO 14443A, ISO 14443B, and ISO 15693 standards, with a default 75-bit Personal Identity Verification (PIV) output format and additional configurable output options. A multicolor LED provides red, green, or amber visual status indication, while an integrated audible indicator confirms reader activity. The MT11 is UL 294 listed, FCC and IC certified, CE marked, and IP65 rated, with an operating temperature range of -40 F to 158 F (-40 C to 70 C) for indoor and outdoor installations.

The Schlage MT11 supports Wiegand and Clock-and-Data communication for connection to compatible electronic access control panels, allowing facilities to integrate the reader with existing credential databases, access permissions, and door control equipment. The separately available MT11-485 configuration provides RS-485 communication with Open Supervised Device Protocol (OSDP) support for systems requiring that interface. Credential interoperability includes Schlage MIFARE DESFire smart cards, MIFARE Classic cards, supported HID proximity credentials, and compatible third-party smart credentials using card serial number identification. The reader supports Schlage NFC mobile access and select third-party mobile credential solutions when configured with the appropriate encryption keys and credential services. Schlage's Custom Encryption Key Service (SCEKS) provides options for deployments requiring customer-specific encryption keys. These capabilities allow organizations to maintain legacy proximity card populations while introducing encrypted smart credentials and mobile access technologies according to their security requirements and controller compatibility.

Installation of the Schlage MT11 mullion-mounted card reader is supported on metal and nonmetal surfaces using the supplied mounting baseplate and quick-connect cable assembly. The manufacturer specifies 18 AWG, five-conductor stranded and shielded cable for standard installation, with Wiegand communication distances up to 500 feet (152 meters) when using the recommended wiring. The installation procedure involves separating the reader housing from its baseplate, preparing the mounting holes, routing the communication cable, securing the baseplate, and connecting the reader to the access control panel. A tamper output is available for connection to compatible security monitoring equipment, while LED and audible feedback assist with installation testing and credential verification. The standard MT11 is supplied in black, with cool-tone gray, cream, and warm-tone brown finish options available for separately specified configurations. Its compact design, outdoor environmental rating, and multi-credential compatibility support access control upgrades without requiring extensive modifications to existing door frames. The Schlage MT11 is backed by a limited lifetime manufacturer warranty, with installation and credential compatibility requirements documented in Schlage's technical literature.



UPC: 812951020019
Also known as: XF-MT11

Technical Specifications:
  • Reader Type: Multitech Proximity
  • Series: Schlage Electronics Networked Readers


For more information about the Schlage MT11, please contact us.
  • Tri-state LED (red, green, amber) visual indicator and audio feedback representing status and activity information, easily discernible for the auldibly or visually impaired
  • FIPS 201-1 Compliant
  • Recognizes most proximity, aptiQ MIFARE Classic, and aptiQ MIFARE DESFire EV1 credentials in one multi-technology reader
  • NFC Compatible
  • Quick-connect cable for easy installation
  • Easy-to-install mounting bracket
  • Dimensions: 5.91" x 1.72" x 0.81"
  • Weight: 5.7 oz
  • Accommodates interior, exterior, metal, and non-metal installation environments
  • Read Range: Proximity--Up to 5"; MIFARE--Up to 4"; MIFARE DESFire EV1--Up to 2"; PIV Credential--Up to 2.5"
  • May be ordered with RS-485 capability
  • Multiple color options
  • Limited Lifetime Warranty
  • Wiegand output for simple interface with most access control panels
Live Chat