STI SS2429LD-EN Stopper Station Push Button
-
MPN: SS2429LD-EN
-
JMAC ID: 200733280
The STI SS2429LD-EN is a blue Stopper Station illuminated lockdown push button designed for manual activation of compatible building security and emergency lockdown systems. Featuring push-to-activate, turn-to-reset operation, two Form C DPDT contacts, and an integrated protective shield, it provides maintained switching while helping prevent accidental activation. The contacts are rated at 10A at 125/250 VAC or 6A at 30 VDC, while the selectable red, green, or white LED illumination operates on 12-24 VAC/VDC. The indoor station is UL/cUL listed and ADA compliant.
STI SS2429LD-EN Blue Illuminated Lockdown Stopper Station with Protective Shield
The STI SS2429LD-EN Stopper Station Lockdown Push Button provides manual activation for compatible emergency lockdown and building security control systems in schools, universities, healthcare facilities, offices, and institutional properties. Manufactured by Safety Technology International (STI), the SS2429LD-EN features a blue polycarbonate housing, raised LOCKDOWN lettering in English, and an illuminated push button with a clear protective shield. The station uses a push-to-activate, turn-to-reset mechanism that maintains its activated position until manually restored. Its protective Stopper Station Shield helps prevent accidental operation, physical damage, and unauthorized interference while allowing users to access the button when necessary. The compact design supports installation near reception desks, administrative offices, security stations, and designated emergency activation points where a clearly identified lockdown control is required.
The SS2429LD-EN incorporates two independent Form C contacts in a double-pole, double-throw (DPDT) configuration, providing normally open, normally closed, and common connections for compatible security and building control circuits. Each contact set is rated at 10 amperes at 125/250 VAC, 1/2 horsepower, or 6 amperes at 30 VDC. The illuminated status bar supports red, green, or white LED illumination using a 12-24 VAC/VDC power supply, with a specified current draw of 21 mA per illuminated color. Separate LED leads allow installers to configure the desired indication through compatible external controls. The mechanical switching assembly maintains its contact state after activation and requires clockwise rotation of the reset mechanism to restore normal operation. This maintained-contact design allows the station to provide a persistent control input until an authorized user physically resets the button, although the connected lockdown controller determines the actual door-locking and system-reset behavior.
The STI SS2429LD-EN features a durable polycarbonate station housing and stainless steel backplate designed for commercial security installations. The station measures approximately 4.87 inches high by 3.25 inches wide by 1.62 inches deep (124 x 82 x 41 mm) and supports flush or surface mounting with appropriate electrical boxes and mounting hardware. The included transparent Stopper Station Shield provides a physical barrier against accidental contact without incorporating a separate audible cover alarm. A compatible STI KIT-71100A-B blue backbox is available for surface-mounted installations, while the KIT-102722-B spacer adds 5/8 inch of mounting clearance when required. The station's wiring connections accommodate the two Form C contact sets and separately powered LED circuit. Its ADA-compliant push button design supports accessible operation when installed at an approved mounting height and location. The SS2429LD-EN is specified for indoor applications; outdoor installations require a suitable STI weather-rated protective enclosure.
The SS2429LD-EN illuminated lockdown station is designed to interface with compatible security control panels, lockdown controllers, access control relays, and building emergency management equipment. Activation changes the state of its two Form C contacts, allowing a connected system to initiate programmed lockdown functions, notify security personnel, or communicate an emergency condition through external equipment. The station itself does not contain a door locking mechanism, alarm communicator, or independent lockdown controller. The SS2429LD-EN differs from the STI SS2422LD-EN, which uses key-to-reset operation, and from non-illuminated Stopper Station configurations. The product is UL/cUL listed and ADA compliant, with the Stopper Station family tested to applicable UL 2017 requirements. STI provides a three-year guarantee against polycarbonate breakage under normal use and a one-year warranty on electromechanical and electronic components. Installation must follow STI's wiring instructions, applicable access control and life-safety requirements, and the emergency lockdown procedures established for the protected facility.
UPC: 662950504870
Also known as: SS2429LDEN
Technical Specifications:
|
For more information about the STI SS2429LD-EN, please contact us.