STI 13200NY Protective Cover for Fire and Security Devices
-
MPN: 13200NY
-
JMAC ID: 200061489
The STI-13200NY Universal Stopper is a surface-mounted protective cover designed to prevent accidental activation and physical damage to fire alarm pull stations, emergency buttons, keypads, and other wall-mounted controls. Featuring a clear, UV-stabilized polycarbonate dome, yellow mounting spacer, and high-strength continuous hinge, it provides accessible protection for indoor and outdoor applications. The horn-free, no-label configuration includes a conduit spacer with two knockouts and weather gaskets. Its ADA-compliant design allows users to lift the cover and operate the protected device when needed.
STI-13200NY Universal Stopper Surface Mount Protective Cover with Yellow Spacer
The Safety Technology International STI-13200NY Universal Stopper provides a protective barrier for wall-mounted emergency and security devices exposed to accidental activation, vandalism, dust, and environmental conditions. Part of the STI-13000 Series Universal Stopper family, this surface-mounted enclosure features a clear polycarbonate dome and yellow conduit spacer that protect the installed equipment while preserving visibility and accessibility. Designed for manual fire alarm pull stations, access control keypads, intercom stations, emergency push buttons, electrical switches, and duplex receptacles, the cover helps reduce unintended operation and physical damage in commercial and institutional environments. Typical applications include schools, healthcare facilities, warehouses, manufacturing plants, transportation facilities, and public buildings where wall-mounted controls may be exposed to frequent pedestrian traffic. The STI-13200NY is supplied without an integrated alarm horn or custom message label, making it suitable for installations requiring a mechanical protective cover without additional electronic notification equipment.
The STI-13200NY is manufactured from thick, impact-resistant polycarbonate designed to withstand physical contact while maintaining a clear view of the protected device. Its UV-stabilized construction helps preserve the transparency of the cover during prolonged exposure to sunlight, while the high-strength continuous hinge supports repeated opening and closing. The transparent dome allows personnel to identify the enclosed control before lifting the cover, helping reduce unnecessary interference with emergency equipment. The cover's 0.125-inch polycarbonate wall thickness provides a durable protective barrier, and the manufacturer identifies a UL 94 V-2 flammability classification for the surface-mounted housing construction. STI specifies typical polycarbonate material properties over a temperature range of -40 F to 284 F (-40 C to 140 C), although the suitability of the complete installation depends on the protected device and environmental conditions. The yellow spacer provides a high-visibility mounting accent, while the clear dome preserves the appearance and legibility of the enclosed equipment. The manufacturer backs the polycarbonate construction with a 3-year guarantee against breakage during normal use.
The STI-13200NY uses a surface-mounted spacer assembly that accommodates compatible wall-mounted controls without requiring a recessed protective enclosure. The manufacturer identifies product dimensions of 5.95 inches high, 4 inches wide, and 3.88 inches deep, while the Universal Stopper dimensional drawing shows an overall surface-mount envelope of approximately 8.15 inches high, 5.4 inches wide, and 4 inches deep. The assembly includes a conduit spacer with two conduit knockouts, weather gaskets, mounting screws, and wall anchors for installation on suitable surfaces. The spacer accommodates 1/2-inch and 3/4-inch conduit connections using the appropriate inserts and sealing gaskets. Installation requires centering the cover over the protected device, marking the mounting holes, securing the spacer assembly, and verifying that the cover opens completely without obstructing the enclosed equipment. STI recommends the optional STI-1314 Universal Stopper Backplate when mounting to uneven wall surfaces to improve sealing and mounting stability. The included gasket arrangement helps limit moisture and debris intrusion when installed according to the manufacturer's instructions. The surface-mount configuration does not include a fully enclosed NEMA-rated backbox; applications requiring that construction must use a separately specified Universal Stopper configuration.
The STI-13200NY is designed for indoor and outdoor applications requiring visible, accessible protection of emergency and security controls. STI identifies the Universal Stopper design as ADA compliant and provides UL/cUL approval information for applicable configurations within the product family. When protecting a fire alarm pull station, the installation must preserve normal access to the initiating device and comply with the applicable fire alarm system listing, NFPA 72 requirements, and authority having jurisdiction. The enclosed pull station must also be rated for outdoor use when installed in exposed locations. The STI-13200NY differs from the STI-13220NY, which incorporates an audible alarm horn, and from the STI-13210NY, which provides a message hood without an integrated horn. Related flush-mount and enclosed-backbox configurations accommodate installations requiring alternative wall preparations or additional environmental protection. Optional accessories include the KIT-65 breakaway seal, STI-1314 mounting backplate, STI-1331 spacer, and replacement gasket kits, subject to their intended applications and compatibility restrictions. The STI-13200NY is a passive protective enclosure and does not include a pull station, electrical contacts, batteries, or an alarm activation circuit. Its transparent dome, yellow spacer, continuous hinge, and surface-mounted construction provide a protective solution for compatible emergency and access control devices without replacing their normal operating functions.
UPC: 662950130574
Also known as: SF-STI13200N, STI-STI13200NY
For more information about the STI 13200NY, please contact us.
- Cover is molded from thick, super tough polycarbonate material.
- Protects pull stations, keypads, intercom stations, emergency buttons, electrical light switches, duplex plugs, etc.
- Indoor/outdoor cover protects against vandalism and accidental damage.
- Three year guarantee against breakage of polycarbonate in normal use.
- Typical working properties of polycarbonate are -40° to 250°F (-40° to 121°C).
- No label on message hood.
- UV-stabilized to keep cover clear.
- Low profile - ADA Compliant.
- High strength continuous hinge.
- Includes a yellow conduit spacer with two conduit knockouts.
- Sized to fit most pull stations.
2 Reviews
-
STI-13200NY
-
STI-13200NY