Rutherford L120ASS140 Exit Device, Pushbar (No Latch) with (SPDT) Switch, Brushed Anodized Dark Bronze, 37 to 48" Door Length

The Rutherford 1200 Series exit devices resolve the conflict between life safety and security. The 1200 Mechanical Series exit devices feature a patented latch that rotates to engage and grip the specially designed strike. This unique interlocking grip action secures the door to the jamb without conventional roller strikes or retracting latches.

In addition an interlocking mechanism located in the chassis offers a double interlocking system which makes these exit devices virtually impossible to tamper with, pry or force open. The attractive lever trim can be used on the exterior side of the door for access.


Also known as: L120ASS1X40

Technical Specifications: Push Bar Inserts: Black vinyl insert supplied. Allows inserts to be added by removing push bar end cap and sliding insert into the Signal Switches: Activated by depressing push bar. Switches can be specified for all types of access controls. SS1 - SPDT rated 3A@30VDC (Inductive), 4A @ 30VDC (Resistive) beep or steady horn. Activated by depressing push bar when in the "Alarm On" position Finish: Brushed Anodized Dark Bronze Current Draw: Electrified Trim 155mA@24VDC Low Battery Alert: Audible chirp indicates low battery (1 chirp/minute). Activated by 7.6 volts Alarm Horn Power: 110db piezo horn; field-selectable continuous horn or 3 to 5-minute sound and reset; field-selectable intermittent Alarm Module Current Draw: Alarm Module 10 - 0.5 microA in Standby position; 16mA when sounding, Alarm Module 20 - 0.5 microA in Standby position; 16mA when sounding, Alarm Module 30 - 0.5 microA in Standby position; 16mA when sounding Alarm Module: 10 - Operated by a 9V alkaline battery (supplied), 20 - Remotely powered field-selectable 10 to 26VDC power with a 9V battery backup (supplied), 30 - Remotely powered field-selectable 10 to 26VDC power groove of the push bar

For more information about the Rutherford Controls L120A-SS1 x 40, please contact us.