RCI 0163-32D 1/2" Surface Mount Rim Electric Strike

The Rutherford Controls RCI 0163-32D is a 1/2-inch surface-mounted, fail-secure electric rim strike with a satin stainless steel (32D) finish, designed for Pullman-style rim exit devices. Its slim 1/2-inch profile supports installations with limited frame clearance, including aluminum storefront entrances. Featuring 1,500 pounds of static holding strength, 70 ft-lb dynamic strength, and 12/24V AC/DC compatibility, the strike provides electrically controlled entry while maintaining mechanical egress through compatible exit hardware. It includes a pivoting keeper, horizontal adjustment up to 1/4 inch, and a non-handed design.

Rutherford Controls RCI 0163-32D 1/2-Inch Surface-Mount Electric Rim Strike

The Rutherford Controls RCI 0163-32D is a slim-profile, surface-mounted electric rim strike designed for Pullman-style rim exit device latches in commercial electronic access control systems. Part of the RCI 0 Series, this fail-secure electric strike enables electrically controlled entry while allowing compatible exit hardware to continue providing mechanical egress from the secured side. Its 1/2-inch-deep stainless steel housing with a satin stainless steel (32D) finish makes it especially suitable for installations where the exit device is positioned close to the door frame, including aluminum storefront doors, commercial entrances, offices, retail facilities, and institutional buildings. Unlike conventional electric strikes that require extensive frame preparation, the 0163 mounts directly to the frame surface, providing an alternative for retrofit applications and narrow-clearance installations. Its non-handed configuration supports both left- and right-hand door applications when properly positioned with compatible hardware.

The RCI 0163-32D features a fail-secure solenoid locking mechanism with 1,500 pounds of static holding strength and 70 foot-pounds of dynamic strength. The strike remains mechanically locked when electrical power is removed and releases its keeper when the appropriate voltage is applied. It supports 11-16 VAC, 12 VAC/VDC, and 24 VAC/VDC operating configurations using the manufacturer-specified wiring harness for the selected power source. At 12 VDC, the strike draws approximately 270 mA, while the 24 VDC configuration draws approximately 140 mA. Direct-current operation supports continuous-duty energization, whereas alternating-current operation is specified for intermittent duty. The strike uses a pivoting keeper that swings outward from the housing to maximize latch engagement and facilitate release. This design accommodates compatible Pullman-style rim exit device latches while providing electrically controlled entry through card readers, keypads, access control panels, and other external switching equipment.

The Rutherford Controls 0163-32D measures 9 inches high, 1-3/4 inches wide, and 1/2 inch deep (229 x 45 x 13 mm), providing a narrow mounting profile for tight-fitting door and frame assemblies. Its high-grade stainless steel construction resists mechanical wear and supports demanding commercial applications. The strike includes horizontal adjustment of up to 1/4 inch (6.4 mm), allowing installers to compensate for minor door and frame alignment variations while maintaining proper engagement with the exit device latch. Additional installation features include plug-in wire connectors, secure lockdown mounting holes, and a deadlatch shim that can be installed when required to prevent a compatible deadlatch from entering the strike cavity. The solenoid design operates without an additional suppression kit under the manufacturer's specified wiring conditions. For double-door applications without a center mullion, the optional RCI 0162DDH double-door housing provides an alternative mounting arrangement, subject to the manufacturer's installation requirements.

The RCI 0163-32D is designed for commercial access control installations requiring a fail-secure electric strike compatible with Pullman-style rim exit hardware. The series is UL 294 listed as an access control system accessory and UL 1034 listed for burglary-resistant electric locking mechanisms. Manufacturer literature also identifies applicable ANSI/BHMA A156.31 Grade 1 performance certification, with testing dependent on the referenced product documentation. The strike is intended for indoor applications and installations not continuously exposed to outdoor environmental conditions. Its fail-secure operation requires the use of compatible exit devices and compliance with applicable building, life safety, and egress regulations. The standard 0163-32D does not include integrated latch monitoring; that functionality is available through the separately specified RCI 0163LM model. Combining a compact 1/2-inch profile, 1,500-pound static strength, adjustable positioning, stainless steel construction, and flexible electrical compatibility, the Rutherford Controls 0163-32D provides a practical electric locking solution for storefront entrances, commercial door retrofits, and access-controlled exit device installations.