Rosslare D-805 4-Door Reader Expansion Board for AC-825IP
-
MPN: D-805
-
JMAC ID: 200622663
The Rosslare D-805 is a four-door access control expansion board designed to increase the capacity of Rosslare AC-825IP networked controllers. Featuring four Wiegand reader ports, eight supervised inputs, and four 5A Form-C relay outputs, the module adds electronic access management for four doors without requiring another primary controller. Its 12-16VDC operation, RS-485 OSDP/RSDP communication interface, and wall or DIN rail mounting options support scalable commercial and institutional access control installations.
Rosslare D-805 Four-Door Access Control Expansion Board for AC-825IP
The Rosslare D-805 Four-Door Expansion Board expands the door management capabilities of the Rosslare AC-825IP networked access control system for commercial offices, apartment buildings, educational facilities, industrial properties, and institutional security installations. Part of the Rosslare R/S/D/P-805 expansion module family, the D-805 provides four additional reader connections, four door-control relay outputs, and eight supervised inputs, allowing administrators to manage four additional access-controlled doors through an existing AC-825IP controller. Each controlled door receives two supervised input connections and one dedicated relay output for integration with compatible electric locks, door position switches, and request-to-exit devices. The modular expansion architecture supports increased door capacity without installing an independent access control panel for each group of entrances. When combined with compatible D-805 expansion modules, the AC-825IP platform supports up to 58 controlled doors, subject to the system configuration and supported firmware.
The D-805 operates on a 12-16VDC power supply, drawing approximately 65 mA in standby at 12VDC and a maximum of 220 mA, excluding connected peripheral devices. Its four programmable Form-C relay outputs are rated at 5A each and provide normally open, normally closed, and common contacts for controlling compatible electric strikes, electromagnetic locks, and access control interfaces. The eight supervised inputs support door monitoring and request-to-exit functions, with a maximum supervised input voltage of 5VDC. Each reader interface provides 10-12VDC output power, a maximum specified reader current of 245 mA, active-low LED control, and reader tamper monitoring. The expansion board measures 7.0 inches high x 3.4 inches wide x 1.5 inches deep (178 x 87 x 38 mm) and weighs approximately 9.5 ounces (268 grams). Designed for indoor environments, it operates at temperatures from 32 F to 122 F (0 C to 50 C) and relative humidity from 0% to 85% without condensation. Integrated power and relay-status LEDs provide visual indication of module operation and individual relay activation.
The Rosslare D-805 supports Wiegand and Clock-and-Data reader communication, allowing integration with compatible proximity card readers, keypad readers, and other credential identification devices. Its RS-485 communication port connects to the AC-825IP through the OSDP/RSDP serial bus, enabling distributed access control expansion across commercial facilities. When used with Rosslare AxTraxPro Access Control Management Software, the expansion architecture supports SIA Open Supervised Device Protocol Version 2 (OSDP V2), including OSDP Secure Channel communication between compatible system components. The AC-825IP controller supports one directly mounted expansion board and up to 12 additional expansion modules over OSDP V2, providing flexibility for larger installations. Through the connected controller and AxTraxNG or AxTraxPro software, administrators can configure access schedules, door interlocking, anti-passback rules, automatic relocking, and programmable input/output responses. These functions are managed by the access control platform rather than independently by the D-805 expansion board. The module is UL 294 7th Edition listed for access control system applications, with performance classifications covering destructive attack, endurance, line security, and standby power.
Installation of the Rosslare D-805 supports direct mounting onto a compatible AC-825IP controller or remote installation using wall mounting and DIN rail hardware. For remote applications, the expansion board connects to the controller's RS-485 OSDP/RSDP communication bus, supporting cable runs up to 4,000 feet (1,200 meters) using a minimum of 22 AWG wiring. Compatible reader connections support Wiegand D0/D1 or Clock-and-Data communication, with typical reader cable runs limited to 500 feet (150 meters) using 18 AWG conductors, subject to the reader manufacturer's requirements. The board includes an enclosure tamper connector, reader LED control connections, and status indicators to assist with installation and troubleshooting. Input and output functions are configured through Rosslare AxTraxNG or AxTraxPro management software, allowing installers to define supervised inputs, relay actions, and door control behavior. The D-805 can be installed in a compatible Rosslare ME-1515 enclosure, which accommodates up to two R/S/D/P-805 expansion modules and supports a regulated power supply and battery backup configuration. The module is designed for use with the AC-825IP controller, which is sold separately, and should be installed according to Rosslare's RSDP-805 Series Installation Guide and applicable electrical and access control requirements.
Also known as: D805
For more information about the Rosslare Security D-805, please contact us.
1 Review
-
ROSSLARE-D805