Protech Technologies SDI-77XL-DIR Outdoor Motion Sensor with Direction Control, Dual Technology, Directional, Narrow Angle, 50'

  • MPN: SDI-77XL-DIR
  • JMAC ID: 200240347
Protech Technologies SDI-77XL-DIR Outdoor Motion Sensor with Direction Control, Dual Technology, Directional, Narrow Angle, 50'
$1,800.00
JMAC_ID:
200240347
df_manual_boost:
1.75
Customer Service
We're here to help
Request a Quote
Low price guarantee Low Price Guarantee
The SDI-77XL-DIR is a dual technology sensor combining Stereo Doppler Microwave and Passive Infrared sensors. The independent sensor technologies are And Gated and must activate the motion sensor switch simultaneously to create an overall sensor alarm. The detection parameters are set up to detect pedestrians and intruders rather than vehicles. The sensor can be used as a gap filler in outdoor perimeter systems. The Dual Technology Version of the direction control sensor is often used in a PH-5 Lookdown Housing to protect ladders, towers, poles, the sides of buildings, etc. against climbers or when detection on the ground at the base of the protected structure is required.

The Direction Control Versions of the PIRAMID XL offer a field adjustable switch to control the direction of a target based on the direction of movement. A three-position digital switch allows the sensor to be set to detect 1) only approaching targets, 2) only receding targets or 3) both approaching and receding targets.

UPC: 999999244261
Also known as: PK-SDI77XLDI, SDI77XLDIR

Technical Specifications:
  • Frequency: 10,525 MHz – USA, 10,587 MHz International, 9,900 MHz International, 9,470 MHz International
  • Shroud Dimensions: 9 1/4” L x 6” W x 4 1/4” H
  • Housing Dimensions: 6 1/4” L x 5 1/4” W x 3 1/2” H
  • Relay contact Rating: 0.1A, 50 V
  • Maximum Camera Dimensions: 5.5″ L x 2.25″ W x 3.25″ H
  • Operating Temperature: -30°F to 130°F -34°C to 54°C
  • RF Power Density: 120 uW/cm2 max at the face of the unit
  • Current Consumption: 150 mA @ 12 VDC (LED’s off)
  • Input Voltage: 8.5 to 20 VDC


For more information about the Protech Technologies SDI-77XL-DIR, please contact us.
  • Dual Technology
  • Narrow Angle Lens
  • MICROPROCESSOR CONTROLLED: Proprietary integrated circuit design provides enhanced digital signal processing for both microwave and passive infrared technologies.
  • BALANCED TEMPERATURE COMPENSATION: Stereo Doppler Microwave and Passive Infrared portions automatically adjust detection parameters to compensate for losses in range that occur at elevated temperatures.
  • DUAL ELEMENT INFRARED DETECTOR: Ignores normal temperature variations yet is very responsive to rapid infrared changes created by an intruder.
  • STEREO DOPPLER MICROWAVE DETECTOR: Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
  • 50 ft.
  • Directional Sensor
  • WEATHER SHROUD: Metal hood that routes rain from sensor’s face and also provides maximum protection from ice, snow, wind and sun loading.
  • METAL RAINTIGHT HOUSING: Rugged, weatherproof housing offers maximum protection against RFI and EMI interference.
  • STEREO DOPPLER SUPERVISION: A component failure will cause the sensor to lock-in alarm.
  • ALL SOLID STATE RELAY: User selectable Form C relay output. A Solid State relay is flexible, silent and more reliable than an electromechanical relay.
  • TAMPER-PROOF: Tamper switch with terminal connection.
  • SWIVEL MOUNTING: 180° Horizontal Adjustment, 90° Vertical Adjustment.
  • WALK-TEST SOUNDER: Optional audible tester to assist in the walk-test and initial sensor setup. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer.
  • ANALYTIC LED’S: Alarm and Environmental Caution LED’s for both technologies displayed on the face of the sensor. An internal switch can disable both Master and Analytic LED’s.
  • MASTER LED: Displayed on the face of the unit indicating the alarm relay status.
  • DIGITAL SENSITIVITY CONTROL: Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
  • DIRECTION CONTROL SWITCH: A Three-position digital switch that controls the direction of movement required for a sensor alarm. The sensor can be set in one of three modes: 1. Detect only approaching movement, 2. Detect only receding movement and 3. Detect both approaching and receding movement.DIGITAL RANGE CONTROL: Ten-position digital switch adjusts how far the sensor detects (to it’s maximum range).

Customer Reviews

(No reviews yet) Write a Review
Live Chat