Protech Technologies SDI-76 Indoor Piramid Dual Technology Intruder Detector, 75' x 75'

  • MPN: SDI-76
  • JMAC ID: 200240333
$1,729.00
JMAC_ID:
200240333
df_manual_boost:
1.75
The PIRAMID (Passive InfraRed And Microwave Intruder Detector) combines Stereo Doppler Microwave and Passive Infrared technologies into an intrusion sensor in which both technologies must activate simultaneously to create a sensor alarm. The Stereo Doppler Microwave portion activates on the movement of the intruder and the Passive Infrared portion activates on the change in infrared radiation caused by the intruder.

The PIRAMID was designed to satisfy high level and medium level security requirements as well as those environmentally difficult applications. Utilizing the unique combination of Stereo Doppler Microwave and Passive Infrared in a Dual Technology sensor not only increases stability but also permits greater detection sensitivity. The high false alarm rejection attributed to this unique combination enables the detection sensitivity of each technology portion to be dramatically increased to levels far beyond sensitivity levels that would be practical if used as single technology sensors.

The result is greater detection sensitivity, greater stability and higher security. PIRAMID is the ultimate in Dual Technology Sensors.

UPC: 999999098777
Also known as: PK-SDI76, SDI76

Technical Specifications:
  • Microwave Frequency: Factory Adjusted to one of the following frequencies: 10,525 MHz – USA, 10,587 MHz – International, 9,900 MHz – International, 9,470 MHz – International
  • Housing Dimensions: 6 1/2” L x 5 1/4” W x 3 3/8” H 16.5cm L x 13.3cm W x 8.5cm H
  • Relay contact Rating: 0.1A,50 V
  • Operating Humidity: 0 to 100% Relative Humidity.
  • Operating Temperature: -30°F to 130°F -34°C to 54°C
  • RF Power Density: 120 uW/cm2 max at the face of the unit
  • Current Consumption: 150 mA @ 12 VDC (LED’s off)
  • Input Voltage: 8.5 to 20 VDC


For more information about the Protech Technologies SDI-76, please contact us.
  • Dual Element Infrared Sensor: Ignores normal temperature variations yet is very responsive to rapid infrared changes created by an intruder.
  • Balanced Temperature Compensation: Stereo Doppler Microwave and Passive Infrared automatically adjust detection parameters to compensate for losses in range that occur at elevated temperatures.
  • 75' x 75'
  • Stereo Doppler Microwave: Two receiving channels rather than one and the ability to eliminate vibration and periodically moving objects as sources of false alarms.
  • Microprocessor Controlled: Proprietary integrated circuit design provides enhanced digital signal processing for both microwave and passive infrared technologies.
  • Digital Range Control: Ten-position digital switch adjusts how far the sensor detects (to its maximum range).
  • Digital Sensitivity Control: Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
  • Assorted Protection Patterns: Interchangeable Fresnel Lens Modules offer a tremendous assortment of protection patterns for optimum flexibility.
  • Stereo Doppler Supervision: A component failure will cause the sensor to lock-in alarm.
  • Master LED: Displayed on the face of the unit indicating the alarm relay status.
  • Analytic LED’s: Alarm and environmental caution LED’s for both Stereo Doppler Microwave and Passive Infrared portions are displayed on the face of the sensor. An internal switch can disable both Master and Analytic LED’s.
  • All Solid State Relay: User selectable form C relay output.
  • Metal Housing: Rugged and durable and offers maximum protection against RFI and EMI interference.
  • Swivel Mounting: Multi-directional

1 Review

  • 5
    PROTECTION-TECH-SDI-76

    Posted by 106053 on Nov 29th 2016

Live Chat