Protech Technologies SDI-76XL-MWVD Outdoor Motion Sensor with Direction Control, Microwave, Vehicular, Wide Angle, 100'

  • MPN: SDI-76XL-MW-VD
  • JMAC ID: 200414546
$1,800.00
JMAC_ID:
200414546
df_manual_boost:
1.75
The SDI-76XL-MWVD is a single technology microwave sensor that is best for detecting vehicles. This version comes in a wide pattern and will detect vehicles (cars) at distances of approximately 100 ft.

The Direction Control Versions of the PIRAMID XL offer a field adjustable switch to control the direction of a target based on the direction of movement. A three-position digital switch allows the sensor to be set to detect 1) only approaching targets, 2) only receding targets or 3) both approaching and receding targets.

UPC: 999999254204
Also known as: PK-SDI76XLMW, SDI76XLMWVD

Technical Specifications:
  • Frequency: 10,525 MHz – USA, 10,587 MHz International, 9,900 MHz International, 9,470 MHz International
  • Shroud Dimensions: 9 1/4” L x 6” W x 4 1/4” H
  • Housing Dimensions: 6 1/4” L x 5 1/4” W x 3 1/2” H
  • Relay contact Rating: 0.1A, 50 V
  • Maximum Camera Dimensions: 5.5″ L x 2.25″ W x 3.25″ H
  • Operating Temperature: -30°F to 130°F -34°C to 54°C
  • RF Power Density: 120 uW/cm2 max at the face of the unit
  • Current Consumption: 150 mA @ 12 VDC (LED’s off)
  • Input Voltage: 8.5 to 20 VDC


For more information about the Protech Technologies SDI-76XL-MW-VD, please contact us.
  • Vehicular Sensor
  • 100 ft.
  • Wide Angle Lens
  • WEATHER SHROUD: Metal hood that routes rain from sensor’s face and also provides maximum protection from ice, snow, wind and sun loading.
  • METAL RAINTIGHT HOUSING: Rugged, weatherproof housing offers maximum protection against RFI and EMI interference.
  • ALL SOLID STATE RELAY: User selectable Form C relay output. A Solid State relay is flexible, silent and more reliable than an electromechanical relay.
  • TAMPER-PROOF: Tamper switch with terminal connection.
  • SWIVEL MOUNTING: 180° Horizontal Adjustment, 90° Vertical Adjustment.
  • WALK-TEST SOUNDER: Optional audible tester to assist in the walk-test and initial sensor setup. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer.
  • ANALYTIC LED’S: Alarm and Environmental Caution LED’s for both technologies displayed on the face of the sensor. An internal switch can disable both Master and Analytic LED’s.
  • MASTER LED: Displayed on the face of the unit indicating the alarm relay status.
  • DIGITAL SENSITIVITY CONTROL: Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
  • DIRECTION CONTROL SWITCH: A Three-position digital switch that controls the direction of movement required for a sensor alarm. The sensor can be set in one of three modes: 1. Detect only approaching movement, 2. Detect only receding movement and 3. Detect both approaching and receding movement.DIGITAL RANGE CONTROL: Ten-position digital switch adjusts how far the sensor detects (to it’s maximum range).
  • STEREO DOPPLER SUPERVISION: A component failure will cause the sensor to lock-in alarm.
  • MICROPROCESSOR CONTROLLED: Proprietary integrated circuit design provides enhanced digital signal processing for both microwave and passive infrared technologies.
  • BALANCED TEMPERATURE COMPENSATION: Stereo Doppler Microwave and Passive Infrared portions automatically adjust detection parameters to compensate for losses in range that occur at elevated temperatures.
  • DUAL ELEMENT INFRARED DETECTOR: Ignores normal temperature variations yet is very responsive to rapid infrared changes created by an intruder.
  • STEREO DOPPLER MICROWAVE DETECTOR: Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
Live Chat