Protech Technologies SDI-76MW Indoor Stereo Doppler Microwave Intruder Detector, 50'x 50'

  • MPN: SDI-76MW
  • JMAC ID: 200240339
Protech Technologies SDI-76MW Indoor Stereo Doppler Microwave Intruder Detector, 50'x 50'
$1,729.00
JMAC_ID:
200240339
df_manual_boost:
1.50
Customer Service
We're here to help
Request a Quote
Low price guarantee Low Price Guarantee
Models SDI-76MW and SDI-77MW are indoor microwave intrusion sensors designed for applications where the very highest level of security is required. As in all PROTECH intrusion sensors, Models SDI-76MW and SDI-77MW utilize PROTECHs proprietary Stereo Doppler Microwave technology.

UPC: 999999325794
Also known as: PK-SDI76MW, SDI76MW

Technical Specifications:
  • Microwave Frequency: Factory Adjusted to one of the following frequencies: 10,525 MHz – USA, 10,587 MHz – International, 9,900 MHz – International, 9,470 MHz – International
  • Housing Dimensions: 6 1/2” L x 5 1/4” W x 3 3/8” H (16.5cm L x 13.3cm W x 8.5cm H)
  • Relay contact Rating: 0.1A,50 V
  • Operating Humidity: 0 to 100% Relative Humidity.
  • Operating Temperature: -40°F to 155°F -40°C to 70°C
  • RF Power Density: 120 uW/cm2 max at the face of the unit
  • Current Consumption: 150 mA @ 12 VDC (LED’s off)
  • Input Voltage: 8.5 to 20 VDC


For more information about the Protech Technologies SDI-76MW, please contact us.
  • 50' x 50'
  • Stereo Doppler Microwave Sensor: Two receiving channels rather than one and the ability to eliminate vibration and periodically moving objects as sources of false alarms.
  • Microprocessor Controlled: Proprietary integrated circuit design provides enhanced digital signal processing for both microwave and passive infrared technologies.
  • Digital Range Control: Ten-position digital switch adjusts how far the sensor detects (to its maximum range).
  • Digital Sensitivity Control: Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
  • Stereo Doppler Supervision: A component failure will cause the sensor to lock-in alarm.
  • Master LED: Displayed on the face of the unit indicating the alarm relay status.
  • All Solid State Relay: User selectable form C relay output.
  • Metal Housing: Rugged and durable and offers maximum protection against RFI and EMI interference.
  • Swivel Mounting: 180° Horizontal Adjustment 90° Vertical Adjustment
  • Fluorescent Filter Module (Optional): FF-2 Fluorescent Filter is a plug-in printed circuit board module that can be field installed on the sensor in applications where nearby fluorescent lighting is affecting sensor performance. The FF-2 Fluorescent Filter is highly recommended in appli-cations where fluorescent lighting will be left on during the protected hours and the lighting fixtures are located in the sensors field of view (within 20 ft.).
  • HS Auxiliary PC Board: Optional factory installed satellite printed circuit board that provides anti-masking and remote self-test features.

Customer Reviews

(No reviews yet) Write a Review
Live Chat