Protech Technologies SDI-77XL-MW-DIR Outdoor Motion Sensor with Direction Control, Microwave, Directional, Narrow Angle, 50'
-
MPN: SDI77XLMWDIR
-
JMAC ID: 200294216
The SDI77XLMWDIR is a ingle technology microwave sensor. The detection parameters are set up to detect pedestrians or intruders rather than vehicles. The sensor is often used in a Lookdown configuration (with PH-5 Lookdown Housing) to protect ladders, towers, the sides of buildings, etc.
The Direction Control Versions of the PIRAMID XL offer a field adjustable switch to control the direction of a target based on the direction of movement. A three-position digital switch allows the sensor to be set to detect 1) only approaching targets, 2) only receding targets or 3) both approaching and receding targets.
Also known as: PK-SDI77XLMR
For more information about the Protech Technologies SDI77XLMWDIR, please contact us.
The Direction Control Versions of the PIRAMID XL offer a field adjustable switch to control the direction of a target based on the direction of movement. A three-position digital switch allows the sensor to be set to detect 1) only approaching targets, 2) only receding targets or 3) both approaching and receding targets.
Also known as: PK-SDI77XLMR
Technical Specifications:
|
For more information about the Protech Technologies SDI77XLMWDIR, please contact us.
- ALL SOLID STATE RELAY: User selectable Form C relay output. A Solid State relay is flexible, silent and more reliable than an electromechanical relay.
- WEATHER SHROUD: Metal hood that routes rain from sensor’s face and also provides maximum protection from ice, snow, wind and sun loading.
- SWIVEL MOUNTING: 180° Horizontal Adjustment, 90° Vertical Adjustment.
- TAMPER-PROOF: Tamper switch with terminal connection.
- 50 ft.
- STEREO DOPPLER SUPERVISION: A component failure will cause the sensor to lock-in alarm.
- METAL RAINTIGHT HOUSING: Rugged, weatherproof housing offers maximum protection against RFI and EMI interference.
- Narrow Angle Lens
- Directional Sensor
- DIGITAL SENSITIVITY CONTROL: Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
- MASTER LED: Displayed on the face of the unit indicating the alarm relay status.
- STEREO DOPPLER MICROWAVE DETECTOR: Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
- ANALYTIC LED’S: Alarm and Environmental Caution LED’s for both technologies displayed on the face of the sensor. An internal switch can disable both Master and Analytic LED’s.
- DUAL ELEMENT INFRARED DETECTOR: Ignores normal temperature variations yet is very responsive to rapid infrared changes created by an intruder.
- BALANCED TEMPERATURE COMPENSATION: Stereo Doppler Microwave and Passive Infrared portions automatically adjust detection parameters to compensate for losses in range that occur at elevated temperatures.
- MICROPROCESSOR CONTROLLED: Proprietary integrated circuit design provides enhanced digital signal processing for both microwave and passive infrared technologies.
- WALK-TEST SOUNDER: Optional audible tester to assist in the walk-test and initial sensor setup. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer.
- DIRECTION CONTROL SWITCH: A Three-position digital switch that controls the direction of movement required for a sensor alarm. The sensor can be set in one of three modes: 1. Detect only approaching movement, 2. Detect only receding movement and 3. Detect both approaching and receding movement.DIGITAL RANGE CONTROL: Ten-position digital switch adjusts how far the sensor detects (to it’s maximum range).