Potter Amseco SH-24H-WP-R Weatherproof High Intensity Horn Strobe, Red, Canadian

The SH-24H-WP Select-A-Strobe/Horn Series provides a wide range of candela light output options in a single device. The candela settings include a 24 volt DC operation for the 95, 110, 135, 150, 177 or 185 setting. The candela setting is displayed through the front window and is selectable using a drum wheel.

The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume settings for each pattern and tone. The tones include 2400 Hz, Electro-Mechanical, Broadband and Chime.

The voltage input can be either regulated DC or full wave rectified (FWR) 24 volt operation with an operating range from 16 to 33 VDC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module.

The SH-24H-WP utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4 square electrical boxes. The back plate allows the installer to mount the plate and connect the wire connections. The strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look.

The Potter SH-24H-WP is listed for both outdoor and indoor installations. For outdoor installations the device must be mounted on a matching BBX-5 back box or a BBK-1 bell back box.


Also known as: PL-4710012, SH24HWPR



For more information about the Potter / Amseco SH-24H-WP-R, please contact us.