Potter Amseco IFS-WPS Industrial Flow Switch, 1" NPT Brass Pipe Connection

The Model IFS-WPS is a low turn radius (1.88") flow switch used in liquid flow lines carrying water or any fluid not harmful to brass, stainless steel, or EPDM, and not classified as a hazardous fluid.

This gadget is solely meant to be used as an operating control. It is the installer's responsibility to implement safeguards (safety, limit controls) that guard against, or mechanisms (alarm, supervisory systems) that warn of, control failure in situations where it could lead to property loss or bodily injury.

UPC: 785192009023
Also known as: PL-IFSWPS

Technical Specifications: Usage: For pipe sizes 1" - 8" Conduit Entrance: One opening for 1/2" conduit Pipe Connection: 1 in. NPT Brass Media Temperature Range: -20°F to 250°F (-29°C to 121°C) Ambient Temperature Range: 32°F to 150°F (0°C to 66°C) Environmental Specifications: Suitable for indoor or outdoor use with factory installed gasket and die-cast housing; NEMA 4 Rated Enclosure - use with appropriate conduit fitting. Pilot Duty Rating: 332VA, 120/240VAC AC L.R.A.: 43.2 (115 VAC), 21.6 (230 VAC) AC F.L.A.: 7.2 (115 VAC), 3.6 (230 VAC) Horsepower: 1/3 Motor Ratings: 115VAC & 230VAC Contacts: One SPDT (Form C) switch, 10 Amps at 125/250VAC, .5 Amps at 125VDC, .25 Amps at 250VDC Enclosure: Die-cast housing and high impact resistant polycarbonate cover. Not for use in hazardous locations. Maximum Service Pressure: 250 PSI

For more information about the Potter / Amseco IFSWPS, please contact us.