Paxton 682-630-US Net2 Plus PoE+ Access Control Unit

The Paxton Access 682-630-US is a Net2 Plus single-door IP access control unit with an integrated PoE+ power supply and protective US metal enclosure, designed for centralized electronic access management in commercial and institutional facilities. The controller features built-in TCP/IP Ethernet connectivity, RS485 networking, two reader ports, and support for up to 50,000 users or credentials, allowing it to manage entry and exit through a single controlled doorway. Compatible with Paxton Net2 access control software, the unit provides centralized credential management, access permissions, event reporting, and programmable door operation while retaining local access decisions during temporary network interruptions. Its integrated IEEE 802.3at PoE+ power supply enables power and network communications through a compatible Ethernet connection, reducing the need for separate electrical infrastructure. Supporting Paxton and compatible third-party proximity readers, keypads, and Wiegand devices, the 682-630-US incorporates a voltage-free lock control relay, exit button input, door contact monitoring, alarm output, and onboard diagnostic indicators. The unit is designed for indoor installation, with an operating temperature range of 32 F to 120 F (0 C to 49 C), and carries UL 294 and FCC Part 15 certifications for commercial electronic access control applications.

Paxton Access 682-630-US Net2 Plus Single-Door IP Access Controller with PoE+ Power Supply and Metal Enclosure

The Paxton Access 682-630-US Net2 Plus Access Control Unit provides networked electronic door access management for commercial buildings, offices, healthcare facilities, educational institutions, warehouses, government properties, and other environments requiring controlled entry. Supplied as a complete single-door Net2 Plus controller housed in a US-style metal enclosure with an integrated PoE+ power supply, the unit combines credential processing, electronic lock control, door monitoring, and network communications in a centralized access control solution. Designed to operate with Paxton Net2 software, the controller enables administrators to configure access privileges, maintain personnel credentials, review historical access events, and coordinate multiple controlled entrances throughout a facility. Each Net2 Plus controller operates as an independent door control unit while communicating with the central management system, providing dependable local credential verification even during temporary interruptions in network connectivity.

The 682-630-US incorporates built-in 10/100 Mbps Ethernet connectivity with a standard RJ45 network interface, allowing direct integration with an existing local area network without requiring a separate TCP/IP converter. The controller also includes an RS485 communications interface that supports connection to additional Net2 Plus or Net2 Classic access control units through a dedicated wired network. This arrangement enables installers to combine Ethernet-connected controllers with RS485 daisy-chained devices, reducing the number of network connections required for larger installations. A single Net2 Plus controller can serve as the Ethernet network interface for additional compatible controllers, subject to Paxton's system capacity and wiring requirements. The manufacturer recommends assigning a fixed IP address for reliable network communications, with initial configuration and network settings managed through the Net2 Configuration Utility.

For credential management and access authorization, the Paxton Net2 Plus controller supports up to 50,000 users or tokens, 250 access levels, and 64 time zones. These capabilities allow administrators to establish individual access permissions, department-specific entry schedules, and restricted access periods for different building areas. The controller supports two reader ports with connections for up to four compatible readers or keypads, subject to reader configuration and available power. Supported reader technologies include Paxton proximity devices, compatible clock-and-data readers, standard 26-bit Wiegand readers, and configurable Wiegand formats up to 50 bits. Access credentials may include proximity cards, keyfobs, and keypad PINs, depending on the installed reader hardware and system configuration. PIN lengths of four through eight digits are supported, and the controller can store more than 2,500 events locally for subsequent reporting through the Net2 software platform.

The 682-630-US uses an integrated IEEE 802.3at Power over Ethernet Plus (PoE+) power supply to simplify networked access control installations by delivering electrical power and data through a compatible Ethernet connection. When connected to an appropriate PoE+ network switch or injector, the unit eliminates the need for a separate conventional AC-powered supply at the controller location. Paxton specifies two available load-output configurations: up to 0.8 amperes and 10.36 watts in low-power PoE+ mode, or up to 1.5 amperes and 20.4 watts in high-power PoE+ mode. Available output power must be evaluated against the combined requirements of the electronic lock, connected readers, and other powered accessories. The PoE+ configuration is especially useful in facilities with existing structured cabling infrastructure, where providing a dedicated electrical circuit for every access control panel would increase installation complexity. Network power availability and any required backup operation depend on the connected PoE equipment and overall system design.

For direct door hardware integration, the Net2 Plus controller includes a voltage-free relay output that can interface with compatible electric strikes, electromagnetic locks, and other electrically controlled door locking devices. The controller's relay is rated for switching up to 24 VDC at 4 amperes, allowing it to control properly rated locking equipment when installed according to manufacturer requirements. Additional connections support request-to-exit buttons, door position contacts, tamper monitoring, power supply fault monitoring, and alarm or bell outputs. The controller includes a dedicated intruder alarm interface for supported security integrations, while configurable door unlock timing allows authorized entry periods to be tailored to facility operations. Diagnostic LEDs located near the associated terminals provide visual operating and troubleshooting information, helping installers identify power, communications, reader, and door control conditions during commissioning and maintenance.

The Paxton 682-630-US is designed for scalable Net2 networked access control installations, allowing multiple door controllers to be managed through centralized software while maintaining independent decision-making at each doorway. When an authorized user presents a credential, the local controller evaluates the stored permissions and activates the locking relay if access is permitted. Changes made through Net2 software are communicated to the controller and stored locally, allowing normal credential authorization to continue during temporary communications failures. Once network connectivity is restored, stored access events can be transferred back to the management computer. This architecture supports reliable operation in larger commercial installations where individual doors must remain functional even when their connection to the central management workstation is temporarily unavailable. Additional Net2 Plus controllers can be incorporated as facility security requirements expand, with the manufacturer specifying support for networked systems containing up to 200 controllers and other compatible Ethernet devices, subject to system design limitations.

The controller is supplied in a protective US metal enclosure measuring approximately 12.6 inches high by 12.6 inches wide, providing a dedicated housing for the Net2 Plus electronics, PoE+ power components, and field wiring connections. The enclosure is intended for secure indoor mounting near the controlled doorway or within an accessible electrical or security equipment area. Paxton specifies an operating temperature range of 32 F to 120 F (0 C to 49 C) for the 682-630-US configuration, and the product is not rated for direct moisture exposure. Installation in outdoor or damp environments requires additional suitable environmental protection. The enclosure and controller assembly are designed for use with compatible Paxton hardware and approved third-party devices, and the manufacturer provides color-coded connection diagrams to simplify reader wiring, power connections, door monitoring inputs, and network installation. Proper conductor sizing, electrical protection, enclosure mounting, and power budgeting should be verified against the manufacturer's installation instructions.

The Paxton Net2 Plus 682-630-US is documented as UL 294 certified and compliant with FCC Part 15 requirements, supporting its use in commercial electronic access control installations. The controller is suitable for facilities requiring centralized access administration, credential-based door control, event history, and flexible expansion without relying on a dedicated communication converter at each door. Its combination of PoE+ power delivery, TCP/IP and RS485 networking, two reader ports, local credential storage, and integrated door monitoring provides a practical foundation for modern electronic access control systems. Unlike standalone proximity controllers, the Net2 Plus platform allows access rights and time schedules to be managed centrally while maintaining essential local door control functions. For new installations, single-door expansions, or replacement of existing Net2 equipment, the 682-630-US offers a configurable networked access control solution. Installers should verify compatibility with the selected readers, locking devices, PoE infrastructure, Net2 software, and any required fire alarm release or emergency egress functions before commissioning the system.