Norton ADA1007P 5800 ADAEZ Pro Series Door Operator Battery

The Norton ADA1007P is a 24VDC rechargeable battery assembly for Norton 5800 Series ADAEZ and ADAEZ PRO low-energy automatic door operators. Designed as a direct replacement for the original ADA1007/1007 battery assembly, it features an integrated on/off switch, LED battery-status indicator, and external power port. The battery supplies operating power to compatible automatic door operators and supports regenerative charging through manual door movement or charging from approved 24VDC equipment. Its replaceable, operator-mounted design helps restore battery-powered automatic door operation without replacing the complete door operator.

Norton ADA1007P 24VDC Battery Assembly for 5800 ADAEZ PRO Door Operators

The Norton ADA1007P Rechargeable Battery Assembly is an original equipment replacement power component designed for compatible Norton 5800 Series ADAEZ and ADAEZ PRO low-energy automatic swing door operators. Manufactured under the Norton Door Controls brand of ASSA ABLOY, the ADA1007P supplies the stored electrical energy required to operate the automatic door opener and its associated electronic control system. The assembly is designed to replace the earlier Norton 1007 battery pack, providing an updated configuration with an integrated power switch, visual battery-status indicator, and power connection port. It is intended for maintaining battery-operated automatic door installations in commercial offices, educational facilities, healthcare buildings, retail entrances, institutional properties, and other locations using compatible Norton ADAEZ equipment.

The ADA1007P incorporates a rechargeable 24VDC battery system with an integrated on/off/option switch and LED status indicator. Its battery assembly provides operating power for the door operator's electromechanical drive and supports the ADAEZ Series' regenerative charging architecture. During manual door operation, the compatible Norton operator converts mechanical movement into electrical energy that helps replenish the onboard battery. The assembly can also receive charging power through compatible 24VDC Class 2 transformer equipment or the separately available ADA1023 external battery charger kit. The operator installation manual identifies three battery-condition indications: green for voltage above 22.5VDC, yellow for voltage between 18.5VDC and 22.5VDC, and red for voltage below 18.5VDC. These indicators assist maintenance personnel with evaluating battery condition and identifying when charging is required.

Designed for replacement and maintenance of Norton ADAEZ low-energy door operators, the ADA1007P connects to the compatible operator through a keyed, three-position battery connector. Installation involves switching the battery assembly off, connecting the battery harness to the designated operator receptacle, and sliding the battery pack into the appropriate mounting position. After ensuring that the wiring does not interfere with the operator cover, the switch is placed in the ON position to restore normal operation. The integrated power port supports compatible external charging arrangements, while the optional ADA1015P hardwire kit provides a transformer, armored door cord, connecting hardware, and low-voltage cable for approved installations. The battery assembly is also associated with the ADA1010P replacement operator body, which is supplied without a battery. The ADA1007P does not independently control door movement, receive wireless activation commands, or replace the operator's electronic control board.

The Norton ADA1007P is designed as an operator-mounted service assembly that can be replaced without removing the complete low-energy door operator from the door. Its compact housing incorporates the battery, electrical connection harness, power switch, and diagnostic LED in a single replaceable component. The manufacturer's 5800 ADAEZ PRO installation manual identifies the onboard battery as a lithium-polymer rechargeable battery and provides instructions for connection, charging, voltage inspection, and troubleshooting. Battery charging can occur through manual door traffic or suitable external power equipment, depending on the operator configuration. When connected to the appropriate charging source, the ADAEZ system can maintain battery readiness for automatic door cycles during interruptions to building power. As a replacement battery assembly rather than a complete automatic door operator, the ADA1007P must be installed with compatible Norton 5800 Series equipment and handled according to the manufacturer's electrical safety and battery disposal procedures. It provides an OEM replacement solution for maintaining the battery-powered operation of existing Norton ADAEZ automatic door systems.