Nitek VB31M Video Balun for UTP Category Cables

  • MPN: VB31M
  • JMAC ID: 200107418
$45.25
JMAC_ID:
200107418
df_manual_boost:
1.75
Please Note: In order to keep our prices low, we have a minimum order requirement of $99
The VB31M is a UTP video balun transceiver that serves as a UTP video transmission device converting coaxial signals for twisted pair transmission into UTP signals. The VB31M provides a low cost means of sending live video over UTP point-to-point wiring for distances of up to 750 feet (225 meters). The VB31M video balun transceiver operates with other passive CCTV baluns or active video receivers to provide CCTV transmission. Up to 1,500 feet (450 meters) with the TR515 single channel receiver and model 51 series hubs, and up to 3,000 feet (900 meters) with the TR560 single channel receiver and model 56 series hubs. A basic system uses (2) video balun transceivers, one at each end of a twisted pair of wires. These units are intended for use over existing in-house telephone wiring, Category 5 wiring or other twisted pair cable runs to provide a convenient, cost-effective alternative to coax. The VB31M is designed to provide superior immunity from noise and interference even when running next to line power. The VB31M is a UTP transceiver that provides another Security Transmission Solution from Nitek.

UPC: 661955003135
Also known as: N1-VB31M, NTK-VB31M

Technical Specifications:
  • Size: 0.9" (H) x 1.0" (W) x 2.0" (D) (not including coax)
  • UTP Category: 2 or better
  • Impedance: 100 Ohms +/- 20%
  • Normal Capacitance: 17pF/ft.
  • DC Loop Resistance: 51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
  • Wire Spec: 26 to 12 AWG Unshielded Twisted Pair (UTP)
  • Twisted Pair Connection: RJ45 jack
  • Humidity Range: 0 to 98%, non-condensing
  • Temperature Range: -10 degrees C to +85 degrees C
  • Common Mode Rejection: >60 dB typ.
  • Operating Frequency: DC to 10 MHz
  • Video Input: 1 vpp composite video monochrome or color
  • Video Format: RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
  • System (2 Transceivers Required):
  • Shipping Weight: 1 lb for single unit
  • Output: Balanced low voltage current loop
  • Input: 1 vpp composite video monochrome or color
  • Power Requirements: NONE REQUIRED


For more information about the Nitek VB31M, please contact us.
  • Compatible with all twisted pair equipped cameras, enclosures and domes
  • Easier to install than coax
  • RJ45 jack connection for twisted pair
  • Quality video over ordinary twisted pair cable
  • Immunity to noise and interference
  • Passive devices - do not require power
  • Mini-coax pigtail for in-camera or dome mounting
  • Weather resistant design

2 Reviews

  • 5
    NITEK-VB31M

    Posted by 181368 on Feb 20th 2022

  • 5
    NITEK-VB31M

    Posted by 180002 on Jan 17th 2022

Live Chat