516-812-0917
Help
Live Chat
Nitek UTPSYS16 16 Port Video, Power and Data Distribution Unit
-
MPN: UTPSYS16
-
JMAC ID: 200237054
16 channel video, power and data distribution unit. Systems operate with other Nitek UTP video transceivers or any twisted pair equipped camera.
This simple to install rack mounted solution contains sixteen channels of passive video and is integrated with a 28VAC power supply The construction is a modular card cage equipped with [4] CHM22 modular cards. The UTPSYS16 is a system which transmits video, power and data through the UTP cable. The cable terminates with a standard RJ45 networking connector. Nitek recommends a maximum cable distance of 750 feet (225 meters) which may be reduced based on camera power requirements. Video, camera power and data will be separated from the cable at the camera end by a VB31AT or VB43ATF video balun.
The UTPSYS16 provides power and video detection LEDs for easy troubleshooting. Camera ports are individually fused with a self resetting fuse. The UTPSYS16 and the DVR are ready to communicate in a matter of minutes by simply connecting a standard coaxial cable between the BNC video output connectors of the UTPSYS16 product and the DVR.
The systems can also adapt to existing communication and computer network spare pairs or new cable installations. These units provide superior immunity from noise and interference, even when run in common raceways with AC.
UPC: 661955025427
Also known as: N1-UTPSYS16
For more information about the Nitek UTPSYS16, please contact us.
This simple to install rack mounted solution contains sixteen channels of passive video and is integrated with a 28VAC power supply The construction is a modular card cage equipped with [4] CHM22 modular cards. The UTPSYS16 is a system which transmits video, power and data through the UTP cable. The cable terminates with a standard RJ45 networking connector. Nitek recommends a maximum cable distance of 750 feet (225 meters) which may be reduced based on camera power requirements. Video, camera power and data will be separated from the cable at the camera end by a VB31AT or VB43ATF video balun.
The UTPSYS16 provides power and video detection LEDs for easy troubleshooting. Camera ports are individually fused with a self resetting fuse. The UTPSYS16 and the DVR are ready to communicate in a matter of minutes by simply connecting a standard coaxial cable between the BNC video output connectors of the UTPSYS16 product and the DVR.
The systems can also adapt to existing communication and computer network spare pairs or new cable installations. These units provide superior immunity from noise and interference, even when run in common raceways with AC.
UPC: 661955025427
Also known as: N1-UTPSYS16
Technical Specifications:
|
For more information about the Nitek UTPSYS16, please contact us.
- Expandable - additional cards can be added for future expansion
- Independently selectable 24VAC-OFF-28VAC with 1.25 Amp max. per channel
- Each port is individually fused by self resetting PLC fuses
- Provides Class II camera power, P/T/Z distribution and video over a single UTP cable
- Class II UL certified
- Standard datacom structured cabling pinouts TIA/EIA 568B using RJ45 connectors.
- LED indicators for power and P/T/Z data
Other products from Nitek
Customer Reviews
(No reviews yet)
Write a Review
