Napco NL-RCV-RMPCUL Central Station Alarm Receiver

Napcos UL864/UL1610- listed NetLink Receiver is an advanced, rack mounted receiver enabling cost-effective, secure internet alarm reporting designed to address the increasing need for UL central stations to adopt new receiver technologies to combat the widespread adoption of Voiceover Internet Protocol (VoIP) services, i.e., in place of traditional telco services. While in full compliance with UL Central Station applications, requiring primary and mirrored, backup receivers, two (2) NetLink UL Receivers can be installed at the same cost as a single traditional receiver. Both NetLink TCP/IP UL Receivers interface with the conventional CS automation system and are simply connected to each other with a network crossover cable, where the secondary mirrored receiver serves as a Hot Backup, duplicate receiver. NetLink UL TCP/IP Receivers feature two modes of operation, Automatic Mode, where alarm signals are sent normally to the automation system for processing, or Manual Mode, used when direct operator interaction is desired, accomplished thru an easy, menu-driven keypad-style alphanumeric interface on the face of the receiver. Listed for UL864 (Control Units for Fire Protective Signaling Systems) and UL1610 (Central Station Burglar Alarm Units).

Technical Specifications: Outputs: PGM-style open collector (negative trigger) with a maximum sink current of 50mA Input Current (NL-MOD): Maximum current (@8 VDC) = 100mA,nominal current (@12VDC) = 80mA. Available panel combined auxiliary current is reduced by 100mA Input Voltage: 13.0-10.0VDC Dimensions: 1 1/2” x 7” x 4 3/4” (HxWxD)

For more information about the Napco NLRCVRMPCUL, please contact us.