Muxlab 500123 LongReach 16 Active CCTV Receiver Hub, UTP/Coax, 220-240V/24VAC

Just plug it in and the 500123 does the rest!

This 16-port, 220V UTP/Coax Receiver Hub has an auto-gain function that can adjust picture brightness, sharpness, and contrast for a better quality image. Supports a 4,500 foot signal over Cat5 cable between camera and DVR or IP camera encoder.

The LongReach16 is a sixteen (16) port active CCTV receiver hub with full Automatic Image Adjustment, providing a true plug-and-forget CCTV cabling solution up to 4,500 ft (1,371m) via Category 5 twisted pair cable. The LongReach 16 automatically optimizes picture brightness, sharpness and contrast based on cable length, thereby eliminating the need for manual adjustments. The 500123 features coax output and works in conjunction with Muxlabs standard CCTV Baluns (500000, 500009, 500022 and 500023.

Technical Specifications: Transmission: Transparent to the user Regulatory: FCC and CE Weight: 4.6 lbs (2.1 kg) Dimensions: 19” x 8.6” x 1.75” (48.3 x 21.7 x 4.4 cm) Mounting: Rackmount (factory default). Removable brackets for wallmount or desktop installation. Rubber stand-offs included for desktop installation. Enclosure: Black Temperature: Operating: 0° to 40°C. Storage:-20° to 85°C. Humidity: up to 95% non-condensing Fuse Rating: 3A Video Ground Loop Isolation: ± 50V max permanent voltage. ±100V max surge for 3 secs Power Transformer Included: North America: 110V/24VAC/60VA. Europe: 220-240/24VAC/70VA Power Consumption – Max.: 40W RMS max. @ 24VAC RMS typical (floating; +15%, -10%) 500132, 500130, 500133 Compatible Baluns/Hubs: 500000, 500000R, 500009, 500021, 500022, 500023, 500024, 500100, 500101, Connectors (reverse polarity sensitive): Video Input from cameras: Sixteen (16) 2-pole screw terminals; Video Output to DVR: Sixteen (16) 2-pole screw terminals or sixteen (16) BNC-F, Ground: One (1) chassis ground lug Cable – BNC: Impedance: 75 ohms at 1 MHz (RG59/U or RG6). Cable – UTP: 24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz, Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz LED Indicators: Power: One (1) green LED. Video Sync: Sixteen (16) green LEDs. Auto Gain Control (AGC): Automatic Gain Control for sharpness and luminosity. Maximum Distance via Cat 5/6 UTP (Longer distances may be achieved when connected directly to a CCTV monitor.): NTSC: Camera to Hub: 4,000 ft (1,219m); Hub to DVR:500 ft (152m). Total:4,500’ (1,371m); PAL: Camera to Hub: 3,000 ft (914m); Hub to DVR: 350 ft (107m). Total: 3,350’ (1,021m). Common Mode Rejection Ratio: Greater than 40 dB @ 3.85 MHz Return Loss: Greater than 15 dB over the frequency range Insertion Loss: -14 dB minimum for luma, -60 dB minimum for chroma. Determined by Automatic Gain Control. Output: 1.1 Vp-p, ± 1 dB, 75O, unbalanced Input: 1.5 Vp-p max, 100O, balanced Bandwidth: DC to 4.5 MHz. Devices: CCTV cameras, DVR, IP camera encoders, monitors, switchers, multiplexers and other CCTV equip. Environment: CCTV equipment for security and surveillance. RS-343 (RS-170) NTSC, PAL

For more information about the Muxlab 500123, please contact us.