Mircom Technologies FHS-340R-WP Wall Mount Weatherproof Horn/Strobe, Red

The FHS-340R-WP Horn/Strobe provides a wide range of candela light output options in a single device. The candela settings include a 12 or 24 volt DC operation for the 15, 35 and 60 (75 on axis) candela settings and 24 volt DC operation for the 15, 35, 60, 75, 95 and 110 candela settings. The candela setting is displayed through the front window and is selectable using a drum wheel. The strobes can be synchronized using a control panel with the Mircom (Amseco) sync protocol or an SDM-240 sync module.

The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume settings for each pattern and tone. The tones include 2400 Hz, Electro-Mechanical and Broadband.

The voltage input can be either regulated DC or full wave rectified (FWR) 12 volt or 24 volt operation with an operating range of 8 to 33V DC.

The FHS-340R-WP utilizes a universal mounting plate. The back plate allows the installer to mount the plate and terminate the wire connections. The horn/strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The horn/ strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look.

The FHS-340R-WP is listed for both outdoor and indoor installations and comes complete with a matching weatherproof back box.


Also known as: MI-FHS340RWP



For more information about the Mircom Technologies FHS340RWP, please contact us.