Louroe IFPX Single Zone PoE In-Line Interface

Model IF-PX is a single zone POE in-line interface designed to extracts power from an Ethernet connection to power Louroe microphones, speaker/microphones and external devices that require a 12Vdc supply such as Encoders and Non PoE IP cameras. The IF-PX supports both one-way and two-way audio. Most commercial grade line level unbalanced microphones are compatible with this unit. Audio output has variable gain control.

Terminal blocks are employed to receive signal wiring from a Louroe Verifact microphone or an AOP-SP speaker/microphone. Two 3.5mm stereo male to 3.5mm stereo male audio cables are included to connect the unit to an IP camera or Encoder. Both Mode A and Mode B power options of IEEE802.3af are supported. Outputs for both PoE (Power+Data) and Non-PoE (Data Only) cameras and Encoders are included. The IF-PX has built-in thermal, overload and short-circuit protection that protects the unit from overcurrent and over temperature. The unit shuts down and turns back ON after the fault is removed.

UPC: 785583005207
Also known as: LO-IFPX, LOU-LE520, IFPXLE520

Technical Specifications: Weight: 13oz. Dimensions: 6L x 3-1/2W x 2-1/8H Material: Black Anodized Al 14 Ga Audio Output Gain: up to +15dB Audio Output/Input: Line level Connectors: RJ-45, DC Jack, Terminal Block for Microphone/Speaker and 3.5mm Stereo Jacks for Audio IN/OUTConnectors Operating Temperature: -20C to +45C Optional Power Supply: 12Vdc, 2A, Ext. Power Supply(Not Supplied) DC Output: 12Vdc, 800mA Voltage Input: 36V - 57V Ethernet Connectors: RJ45 CAT 5 Input and Output Jacks

For more information about the Louroe Electronics IF-PX (LE-520), please contact us.