
Locknetics 6400 US32D Modular Strike for Mortise and Cylindrical Locksets
-
MPN: 6400-US32D
-
JMAC ID: 202481860
The 6400 electric door strike from Locknetics is designed to be modular and highly configurable to fit nearly any mortise or cylindrical lock. This versatile strike allows the installer to insert and lock-in the deadbolt keeper or plug and deadlatch ramp anywhere within its 3-1/8" vertical opening to fit the latch position and functional needs. This, combined with a 1/8" horizontal adjustment, makes this easy-to-install design a good fit for installations where misalignment or a tight fit may be a problem.
As a 3-hour UL 10C listed strike, the 6400 Series is intended as a fail-secure only solution for fire-rated openings. Its durability and quality are shown by its grade 1 certification as a heavy-duty stainless steel strike with over 2,000,000 endurance cycles.
Use it as a time-saving, "go to" strike. The 6400 comes ready for use with prewired plug-in connectors for 12 or 24 VDC voltage that can be changed over to 12 or 24 VAC without a converter kit, two faceplates one each for offset and centerline locks as well as a trim filler plate, mounting tabs and shims and a self-adhesive template for frame cuts. An optional "plug in" latchbolt monitor is also available and can be added in the field at any time after installation.
Also known as: VN-6400, 6400US32D
For more information about the Locknetics 6400-US32D, please contact us.
As a 3-hour UL 10C listed strike, the 6400 Series is intended as a fail-secure only solution for fire-rated openings. Its durability and quality are shown by its grade 1 certification as a heavy-duty stainless steel strike with over 2,000,000 endurance cycles.
Use it as a time-saving, "go to" strike. The 6400 comes ready for use with prewired plug-in connectors for 12 or 24 VDC voltage that can be changed over to 12 or 24 VAC without a converter kit, two faceplates one each for offset and centerline locks as well as a trim filler plate, mounting tabs and shims and a self-adhesive template for frame cuts. An optional "plug in" latchbolt monitor is also available and can be added in the field at any time after installation.
Also known as: VN-6400, 6400US32D
Technical Specifications:
|
For more information about the Locknetics 6400-US32D, please contact us.
- Vertical adjustments allow for alignment with a wide variety of mortise locks with offset latches
- Can accommodate up to 1” deadbolt (for night latch only)
- Horizontal adjustment of up to 1/8" improves fit on tight door preps
- Endurance 2,000,000 cycles
- Dynamic strength 70 ft-lbs
- Static strength: 1500 lbs
- ANSI/BHMA A156.31, Grade 1 certified
- CSFM California State Fire Marshal listed
- UL 294 listed for access control system
- UL 1034 listed for burglary-resistant electric door strikes
- 3-hour fire-rated to UL 10C (fail secure only)
- Suitable for interior and exterior doors
- Low current draw (0.19 amps @ 24 VDC)
- Non-handed, unique internal solenoid design prevents keeper from heating up
- Optional plug-in latchbolt monitor can be added in the field
- Plug-in voltage connectors are included for ease of installation and removal during strike servicing
- Field selectable voltage 12 or 24VDC and 12 to 24VAC
- Modular design fits cylindrical and nearly any mortise lock
- Heavy-duty stainless steel construction in BHMA 630 satin finish
1 Review
-
LOCKNETICS-6400-US32D