Inovonics EN1235SF Single-Button Fixed Position Hold Up Transmitter

  • MPN: EN1235SF
  • JMAC ID: 200012356
$99.75
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200012356
df_manual_boost:
1.90

The Inovonics EN1235SF is a single-button fixed-position wireless hold-up transmitter designed for emergency alarm signaling in commercial security systems. Operating on the 902-928 MHz EchoStream wireless frequency range, it features one-button activation, integrated back-tamper protection, and an LED transmission indicator. The compact, battery-powered transmitter measures 3.0 x 1.6 x 0.72 inches, provides a typical 3-5-year battery life, and sends supervised check-in messages every three minutes. It supports compatible Inovonics receivers and is UL listed for commercial security applications.

Inovonics EN1235SF Single-Button Fixed-Position Wireless Hold-Up Transmitter

The Inovonics EN1235SF Single-Button Fixed-Position Hold-Up Transmitter provides wireless emergency alarm activation for commercial intrusion detection and security monitoring systems. Designed for concealed, stationary installation, the transmitter allows personnel to initiate a hold-up or panic alarm by pressing a single activation button for at least one second. Its rugged black housing incorporates back-tamper protection to detect unauthorized removal from the mounting surface, providing an additional level of security for fixed-location alarm installations. The EN1235SF operates using Inovonics EchoStream wireless technology, transmitting alarm signals to compatible receivers without requiring a hardwired connection to the security control panel. An integrated LED flashes during transmissions to provide visual confirmation of device activity, while the transmitter sends multiple alarm messages during activation and an alarm-restoral message when the button is released.

The EN1235SF wireless hold-up transmitter communicates over the 902-928 MHz frequency range using frequency-hopping spread-spectrum (FHSS) technology in North American installations. Each transmitter contains a factory-programmed identification number for individual registration and monitoring through a compatible Inovonics receiver or gateway. When supervised, the device transmits a check-in message every three minutes, enabling the receiving system to monitor transmitter communication. Powered by a 3.0V Panasonic CR2 lithium battery, the EN1235SF provides a typical battery service life of 3 to 5 years, depending on operating conditions. Its compact enclosure measures 3.0 inches long, 1.6 inches wide, and 0.72 inches deep and weighs approximately 1.6 ounces (45 grams). The transmitter operates in temperatures from 32 F to 140 F (0 C to 60 C) and relative humidity up to 90% non-condensing. Regulatory compliance includes FCC, RoHS, UL 365, UL 636, UL 1076, and UL 1610.

The Inovonics EN1235SF is designed for fixed-position installation in banks, retail stores, reception desks, security offices, pharmacies, and commercial facilities requiring discreet emergency alarm activation. Its compact design allows installation beneath counters, underneath desks, or at other concealed locations accessible to authorized personnel. The transmitter includes a mounting backplate, two mounting screws, and a 3.0V lithium battery for installation. Proper mounting is required because the integrated tamper spring must contact the mounting surface to prevent a persistent tamper condition. The device is compatible with Inovonics EchoStream receivers, including the EN4000 Universal Serial Receiver, EN4200 Security Only Serial Receiver, EN4204R Four-Zone Receiver, EN4216MR 16-Zone Receiver, and EN4232MR 32-Zone Receiver, subject to system compatibility and approval requirements. For UL installations, Inovonics specifically identifies the EN4216MR, EN4232MR, and EN7285 as compatible receivers in the installation documentation.

The EN1235SF fixed-location wireless panic transmitter supports supervised security applications where reliable emergency signaling and tamper monitoring are required. Installation involves securing the mounting backplate, inserting the lithium battery, initializing the transmitter using its reset button, and registering the device with the receiving system. The transmitter ships configured for 902-928 MHz operation in North America, with selectable 915-928 MHz and 921-928 MHz frequency ranges for Australia and New Zealand, respectively. Once registered, the transmitter communicates alarm, alarm-restoral, tamper, and periodic supervision information through the compatible receiving system. Inovonics specifies weekly manual testing to verify operation and proper alarm response. The EN1235SF is intended for indoor use and professional security system installation; system installers must confirm receiver compatibility, mounting conditions, and applicable UL requirements. The manufacturer's EN1235SF/EN1235DF Installation Instructions (05834F) provide detailed mounting, programming, operation, and maintenance procedures.



UPC: 875189003223
Also known as: IV-EN1235SF

Technical Specifications:
  • Battery: BAT608
  • Dimensions: 3.0" x 1.6" x 0.72"
  • Battery Life: 3 - 5 years
  • Frequency: 900 MHz


For more information about the Inovonics EN1235SF, please contact us.
  • Easy single-button activation
  • Include back tamper for secure fixed position alarm signaling
  • LED flashes with all transmissions, ensuring operation at a glance
  • UL listed

2 Reviews

  • 5
    INOVONICS-EN1235SF

    Posted by 175003 on Sep 8th 2021

  • 5
    INOVONICS-EN1235SF

    Posted by 139642 on Mar 25th 2019

Live Chat