Honeywell PROLTE-V2 Verizon LTE Alarm Communicator
-
MPN: PROLTE-V2
-
JMAC ID: 202541908
The Honeywell Home PROLTE-V2 is a Verizon LTE cellular communication module designed for compatible Resideo ProSeries and VISTA H3 security control panels. It provides cellular alarm reporting through the AlarmNet network, allowing supported panels to communicate with a central monitoring station. The module features LTE Bands 4 and 13, internal diversity antennas, and optional external antenna support. It draws 30 mA in standby and up to 860 mA during transmission, with power supplied directly by the control panel.
Honeywell PROLTE-V2 ProSeries Verizon LTE Cellular Alarm Communicator
The Honeywell Home PROLTE-V2 is a plug-in LTE cellular communicator designed to provide alarm reporting for compatible Resideo ProSeries and VISTA H3 security systems. Operating on the Verizon LTE network in the United States, the module enables a connected control panel to transmit alarm events and system information through Resideo's AlarmNet communication infrastructure. It supports compatible PROA7, PROA7PLUS, and VISTA H3 control panels, with panel firmware and service compatibility requirements determined by the installed system. The PROLTE-V2 replaces the earlier PROLTE-V communicator and provides a cellular communication path for residential and small commercial security installations.
The PROLTE-V2 supports LTE Bands 4 and 13 and incorporates internal multiband diversity antennas for cellular communication. Its 30 mA standby current and 860 mA maximum transmission current are supplied through the control panel's internal module connection. The communicator operates on 5 VDC provided by the host panel and does not require a separate external power adapter. It uses the control panel's backup battery during an AC power interruption, subject to the system's battery condition and standby capacity. An optional PROLTE-ANT external antenna kit supports installations requiring improved cellular signal reception, with external antenna installation subject to manufacturer requirements.
The PROLTE-V2 cellular module connects directly to a compatible control panel and is configured through the panel's programming interface. On supported ProSeries systems, the communicator provides cellular connectivity for central station alarm reporting and compatible AlarmNet remote services. Cellular communication can serve as a primary or alternate reporting path depending on panel configuration, available network connections, and monitoring service settings. The module supports end-user replacement in compatible installations, while activation and service configuration require an appropriate AlarmNet account and cellular monitoring service. Resideo specifies control panel firmware version 3.1297.50 or later for PROLTE-V2 compatibility on applicable ProSeries panels.
The Honeywell PROLTE-V2 measures approximately 2.7 inches long x 2.8 inches wide x 0.7 inches high (70 x 72 x 18 mm) and installs within the designated communicator compartment of a compatible security panel. Its operating temperature range is 32 F to 122 F (0 C to 50 C), with maximum relative humidity of 90%, non-condensing. Manufacturer-listed approvals include ETL and applicable FCC requirements. Installation requires disconnecting the control panel's AC and battery power before inserting the module, followed by communication programming and a cellular signal test. Designed specifically for United States Verizon LTE service, the PROLTE-V2 provides an integrated cellular alarm communication option without requiring a separately mounted communicator enclosure.
UPC: 194160008812
For more information about the Honeywell PROLTE-V2, please contact us.