Honeywell Ademco 944TRE-WH 3/8" Rare Earth Contact w/ Terminals, White
-
MPN: 944TRE-WH
-
JMAC ID: 200088711
The Honeywell 944TRE-WH is a compact, recessed magnetic door and window contact designed to provide concealed perimeter intrusion detection for compatible hardwired security and alarm systems. Featuring a 3/8-inch (10 mm) diameter press-fit housing, rare-earth button magnet, and 1/2-inch (13 mm) standard operating gap, the 944TRE-WH monitors the opening and closing of doors, windows, cabinets, and other protected openings. The sensor incorporates a Form A single-pole, single-throw (SPST) reed switch rated at 100 mA at 28 VDC, providing a closed alarm circuit when the magnet is correctly aligned with the contact. Honeywell's exclusive staggered T-style screw terminals simplify wiring by allowing direct connection of security cable without soldering or splicing. Its white housing provides a discreet appearance when recessed into compatible wood door or window frames. Requiring no batteries or separate operating power, the 944TRE-WH is suitable for residential security systems, commercial offices, retail facilities, and institutional intrusion detection applications where concealed magnetic contact monitoring is preferred.
Honeywell 944TRE-WH 3/8-Inch Recessed Magnetic Contact with Rare-Earth Magnet, White
The Honeywell 944TRE-WH Recessed Magnetic Contact provides discreet, hardwired perimeter protection for residential and commercial security systems requiring concealed door and window monitoring. Manufactured under the Honeywell security product family and currently offered by Resideo, the 944TRE-WH combines a 3/8-inch diameter magnetic reed switch, rare-earth button magnet, and staggered T-style screw terminals in a compact recessed design. The sensor detects changes in the relative position of the magnet and magnetic contact, allowing a compatible intrusion alarm control panel to determine whether the protected opening is closed or has been opened. Its 1/2-inch (13 mm) standard operating gap accommodates properly aligned door and window installations while maintaining a small, concealed mounting profile. Unlike surface-mounted magnetic contacts that remain visible along the door or window frame, the 944TRE-WH is installed within drilled openings, leaving minimal hardware exposed. This construction makes it suitable for residential entry doors, office doors, interior security partitions, windows, storage cabinets, and other protected openings where discreet appearance and dependable contact operation are important.
The 944TRE-WH incorporates a Form A single-pole, single-throw (SPST) magnetic reed switch designed to close its electrical contacts when the supplied rare-earth magnet is positioned within the specified operating range. The manufacturer specifies a maximum contact rating of 100 mA at 28 VDC, supporting connection to compatible low-voltage intrusion detection circuits. Its cylindrical housing uses a 3/8-inch (10 mm) diameter press-fit design, with an approximate sensor body depth of 1.2 inches (30 mm). The matching rare-earth button magnet measures approximately 3/8 inch in diameter by 1/8 inch thick, allowing installation in narrow door and window locations where larger conventional magnets may be impractical. The sensor's distinctive staggered T-terminal arrangement provides accessible screw terminals within the compact housing, enabling installers to terminate compatible 18-24 AWG solid or stranded security wiring without soldering, wire splices, or additional terminal adapters. The white finish blends with common painted wood trim and light-colored door frames, while the passive magnetic switching design requires no separate operating voltage, internal battery, electronic programming, or wireless communication. Resideo specifies an ambient operating temperature range of -40 F to 194 F (-40 C to 90 C) for the product, with final installation suitability dependent on the surrounding environment.
For conventional intrusion detection applications, the Honeywell 944TRE-WH provides normally open reed-switch contacts that close when the protected door or window is in its secured position. When the opening moves and the rare-earth magnet separates from the recessed contact beyond its operating range, the switch returns to its open state, allowing the connected security control panel to register a zone change. This operating arrangement supports normally closed alarm-loop configurations when the door or window is closed, a common method of supervising perimeter openings in hardwired intrusion alarm systems. The 944TRE-WH can be integrated with compatible Honeywell VISTA Series alarm panels and other conventional security controllers that accept dry-contact initiating devices, subject to the appropriate zone wiring and resistance requirements. Where end-of-line supervision is required, the associated resistor must be installed according to the security panel manufacturer's instructions; the magnetic contact itself does not independently supervise the wiring circuit. Its rare-earth button magnet provides a compact magnetic actuator for installations with limited mounting space, particularly narrow window tracks and concealed frame preparations. The manufacturer's magnetic contact reference identifies the 944TRE as a potential replacement for the GRI N2020-TWG and Sentrol R1125T, provided that mounting dimensions, switching characteristics, and application requirements are verified. The 944TRE-WH differs from the standard Honeywell 944T-WH, which uses a conventional magnet and provides a 3/4-inch standard operating gap rather than the 944TRE's 1/2-inch gap.
Installation of the Honeywell 944TRE-WH recessed magnetic door contact involves preparing aligned mounting locations for the sensor and rare-earth magnet within the stationary frame and moving door or window. The contact's 3/8-inch press-fit housing is designed for a properly sized drilled opening, while the matching button magnet is recessed opposite the sensing element to establish the required magnetic operating relationship. Honeywell recommends the 944TRE family for concealed installation in compatible wood-frame doors and windows, with additional application considerations required for metal frames or other materials that may alter magnetic performance. Before securing the contact, installers route the security cable through the frame and terminate the conductors using the staggered T-style screw terminals, which provide direct wire connections without soldering or pigtail splicing. The sensor and magnet must be positioned so that the closed opening maintains the specified 1/2-inch (13 mm) standard gap or less under the applicable mounting conditions. After installation, technicians verify electrical continuity with the door or window closed, confirm that the circuit changes state when the opening is moved, and test proper alarm reporting through the connected security control panel. Because the 944TRE-WH is a passive mechanical reed contact, it requires no battery replacement, software configuration, or routine electronic calibration. Periodic maintenance consists of checking alignment, inspecting electrical connections, and testing contact operation as part of the security system's scheduled inspection procedures. The 944TRE-WH features a white housing, while the separately available 944TRE-BR provides a brown finish for darker architectural surfaces. Combining concealed 3/8-inch mounting, a compact rare-earth actuator, staggered screw terminals, and conventional Form A contact operation, the Honeywell 944TRE-WH provides a practical solution for hardwired door and window intrusion detection in residential and commercial security systems.
UPC: 781410548480
Also known as: 944TREWH
Technical Specifications:
|
For more information about the Honeywell Ademco 944TRE-WH, please contact us.
- Color: White
- 1/2" standard gap
- Rare earth button magnet
- Form A (SPST) reed/closed when energized with rare earth actuator magnet
2 Reviews
-
HONEYWELL-944TRE-WH
-
HONEYWELL-944TRE-WH