HID 6005B1B00 ProxPoint Plus 125 kHz Proximity Reader, Designer Black
-
MPN: 6005B1B00
-
JMAC ID: 200088527
The HID 6005B1B00 ProxPoint Plus is a compact, 125 kHz proximity card reader designed for commercial access control systems using Wiegand communication. Featuring a maximum read range of 3 inches, 5-16VDC operation, and an 18-inch pigtail connection, it supports compatible HID proximity cards and key fobs. The reader includes a designer black polycarbonate housing, multicolor LED, and integrated audible beeper. Its factory configuration provides a normally red LED that flashes green when a credential is presented. The IP55-rated enclosure supports indoor and outdoor installations, including direct mounting on metal door mullions.
HID 6005B1B00 ProxPoint Plus 125 kHz Wiegand Proximity Reader, Designer Black
The HID 6005B1B00 ProxPoint Plus Proximity Reader provides contactless credential identification for commercial access control systems requiring a compact, surface-mounted card reader. Manufactured by HID Global, part of ASSA ABLOY, the reader operates at 125 kHz and transmits credential information to compatible access control panels through a Wiegand interface. Designed for commercial offices, educational facilities, healthcare buildings, warehouses, apartment entrances, and restricted-access doorways, the ProxPoint Plus supports HID proximity credentials using card formats of up to 85 bits. Its small form factor accommodates installation on narrow aluminum door mullions, metal frames, and other mounting surfaces where larger readers may be impractical. The 6005B1B00 features HID's designer black cover, providing a discreet appearance suitable for modern commercial entrances. The reader incorporates sealed electronic components and an integrated antenna, allowing contactless credential presentation without physical contact between the card and reader.
The HID 6005B1B00 provides a typical maximum reading distance of 3 inches (7.6 cm) with HID ProxCard II credentials, with operating range determined by credential construction and installation conditions. Compatible ISOProx II and DuoProx II cards provide reading distances up to 2.5 inches (6.35 cm), while ProxKey II key fobs can be read at distances up to 1.5 inches (3.8 cm). The reader also supports compatible ProxCard Plus credentials up to 1 inch (2.5 cm) and MicroProx tags up to 2 inches (5.1 cm). Its 125 kHz proximity interface recognizes supported HID credential formats, including 26-bit Wiegand and other compatible formats within the reader's 85-bit capability. The factory-programmed configuration 00 enables the internal beeper and maintains a normally red status LED that flashes green when a valid proximity credential is detected. The multicolor LED and audible beeper can also be controlled through compatible host system connections, allowing the access control panel to provide visual and audible feedback. During power-up, an internal diagnostic routine verifies reader configuration, initializes operation, and identifies local or external LED and beeper control settings. The reader also supports external loopback testing to assist with installation and troubleshooting.
The HID ProxPoint Plus 6005B1B00 operates on 5-16VDC power, with a manufacturer-specified average current requirement of 30mA and a peak current requirement of 75mA. HID recommends a regulated linear power supply for reliable operation. The reader includes a factory-installed 18-inch (45.7 cm) wire pigtail for connecting power, Wiegand data, ground, and optional LED and beeper control signals. Supported Wiegand communication distances extend up to 500 feet (150 meters) using appropriately specified cable, such as 22 AWG, five-conductor stranded cable with an overall shield. The compact enclosure measures 3.135 inches high, 1.720 inches wide, and 0.660 inches deep (79.6 43.7 16.8 mm) and weighs approximately 2.7 ounces (75 grams). Its mounting design allows direct attachment to compatible metal surfaces without the reduction in reading performance commonly associated with some proximity reader installations. Installation requires securing the reader through its mounting holes, routing the pigtail through the mounting surface, connecting the appropriate conductors to the access control panel, and installing the snap-on designer cover. The reader is supplied with mounting screws and a multilingual installation manual; the power supply, access control panel, and proximity credentials are separate components.
The HID 6005B1B00 features a rugged, weather-resistant polycarbonate enclosure with an IP55 environmental rating, supporting indoor and outdoor access control installations exposed to dust and water spray. Its sealed electronics operate within a temperature range of -22 F to 150 F (-30 C to 65 C) and support 0-95% relative humidity, non-condensing. The ProxPoint Plus reader family carries UL 294/cUL access control listings, FCC certification, IC certification, CE marking, and RoHS compliance, as identified in HID manufacturer documentation. The 6005B1B00 is the Wiegand-output model with an 18-inch pigtail, designer black housing, and standard 00 LED/beeper configuration. Related models include the 6005B1L00 with a 9-foot pigtail and the 6008 Series with Clock-and-Data output for compatible legacy access control systems. The device is a proximity credential reader rather than a standalone access controller and does not independently manage user permissions, operate door locks, or store an access control database. Its 125 kHz technology is intended for compatible legacy proximity systems and does not provide the encrypted smart card authentication associated with newer 13.56 MHz credential platforms. HID provides a limited lifetime manufacturer warranty against defects in materials and workmanship, subject to the applicable warranty policy. The 6005B1B00 provides a compact solution for maintaining or expanding Wiegand-based proximity access control installations using compatible HID credentials.
UPC: 639399220371
Also known as: HU-6005B1B00
Technical Specifications:
|
For more information about the HID 6005B1B00, please contact us.
- Can read HID cards with formats up to 85 bits
- Compatible with all standard access control systems
- Enables various beeper and LED configurations, depending on individual site requirements
- Designed for mounting directly onto metal with no change in read range performance
2 Reviews
-
HID-6005B1B00
-
HID-6005B1B00