HID 40TKS-00-000000 Signo 40 Multi-Tech Wall Card Reader
-
MPN: 40TKS-00-000000
-
JMAC ID: 202436100
The HID 40TKS-00-000000 Signo 40 is a multi-technology, wall-mounted access control reader designed for commercial electronic security systems. Supporting 125 kHz proximity cards, 13.56 MHz smart credentials, and HID Mobile Access through Bluetooth and NFC, the reader accommodates both legacy and modern credential technologies. It features OSDP Secure Channel and Wiegand communication, a terminal strip connection, 12 VDC operation, and IP65-rated construction. Its black housing with silver trim, standard US single-gang mounting format, and keypad-free design provide secure credential authentication for indoor and outdoor doors.
HID 40TKS-00-000000 Signo 40 Multi-Technology Wall Mount Access Control Reader
The HID 40TKS-00-000000 Signo 40 Reader is a commercial-grade, multi-technology credential reader designed to provide secure electronic access control for commercial buildings, educational institutions, healthcare facilities, government properties, and industrial environments. Manufactured by HID Global, the Signo 40 combines 125 kHz proximity credential compatibility, 13.56 MHz contactless smart card technology, and 2.4 GHz Bluetooth mobile credential support within a single wall-mounted device. The reader supports established access control technologies, including HID Proximity, Indala Proximity, AWID, iCLASS SE, iCLASS SR, Seos, MIFARE Classic, and MIFARE DESFire EV1/EV2, subject to the reader's configured credential profile. Native Bluetooth Low Energy and Near Field Communication (NFC) capabilities also support HID Mobile Access credentials managed through compatible HID Origo services. The 40TKS-00-000000 configuration features a black front housing with silver trim, terminal strip wiring connections, a standard credential profile, and no integrated keypad, providing a modern access control interface for facilities upgrading existing card reader infrastructure or installing new electronic access systems.
The Signo 40 incorporates multi-frequency credential reading at 125 kHz, 13.56 MHz, and 2.4 GHz, allowing organizations to support legacy proximity cards while transitioning toward more secure smart card and mobile identification technologies. Typical published read distances range from 4 to 10 cm for compatible 13.56 MHz credentials and 6 to 10 cm for compatible 125 kHz proximity cards, with actual performance determined by credential construction, installation conditions, and reader configuration. The reader supports Wiegand, OSDP v1, OSDP v2, and OSDP v2 Secure Channel communication, enabling connection to compatible access control panels and reader interface modules. OSDP Secure Channel provides encrypted, bidirectional communication between the reader and a supported controller, helping protect credential communications against interception and unauthorized modification. HID's secure credential architecture supports Seos and Secure Identity Object (SIO) technologies, while integrated secure element hardware protects supported cryptographic operations. The reader also incorporates a tri-color LED, audible buzzer, configurable reader behavior, and an internal tamper relay rated for switching up to 60 VDC at 100 mA. Configuration and supported firmware management functions are available through the HID Reader Manager application.
The HID Signo 40 40TKS-00-000000 measures 4.78 inches high, 3.15 inches wide, and 0.77 inches deep (121.5 x 80 x 19.5 mm) and is designed for surface or wall mounting using a standard US single-gang electrical box. Its terminal strip connection provides a field-wiring alternative to the pigtail connections offered on other Signo reader configurations. The unit operates from a nominal 12 VDC power supply, with a maximum average current consumption of approximately 75 mA and peak current consumption of 250 mA. HID's Intelligent Power Management functionality can reduce standby current consumption when enabled, supporting energy-conscious access control installations. The housing is manufactured from UL 94 V-0-rated polycarbonate and features IP65 ingress protection and IK07 impact resistance, making the reader suitable for indoor and outdoor mounting locations subject to the manufacturer's environmental requirements. Its specified operating temperature range extends from -31 F to 151 F (-35 C to 66 C), with relative humidity tolerance from 0% to 95% non-condensing. The reader carries applicable regulatory approvals, including UL 294, FCC, CE, and RoHS, and is supported by HID's limited lifetime manufacturer warranty.
The HID 40TKS-00-000000 is designed for access control applications requiring compatibility between existing physical credentials and newer mobile or encrypted smart card technologies. Its multi-technology architecture allows facilities to retain compatible 125 kHz proximity cards during migration to HID Seos, iCLASS SE, MIFARE DESFire, or HID Mobile Access credentials, helping reduce the need for simultaneous replacement of every credential in an established access control system. Support for Wiegand communication provides connectivity with compatible legacy controllers, while OSDP Secure Channel offers an enhanced communication option for access control systems that support encrypted reader-to-panel connections. Compared with the HID Signo 40NKS, which uses a pigtail wiring connection, the 40TKS provides terminal strip termination for structured field wiring. The HID Signo 40KTKS provides a comparable wall-mounted reader with an integrated keypad for applications requiring PIN entry or card-and-PIN authentication, whereas the 40TKS is designed for card and mobile credential presentation without a keypad. Compatible mounting accessories include the HID 40-K-05 and 40-S-05 half-inch spacers and the 40-K-10 and 40-S-10 one-inch spacers, which accommodate additional installation clearance and cable routing requirements. The reader is intended for use with compatible access control panels, credential formats, and HID management software, with final system functionality dependent on controller support, credential configuration, and applicable licensing requirements.
UPC: 639399027291
Also known as: HU-40TKS0000, HID-40TKS00000000, 40TKS00000000
Technical Specifications:
|
For more information about the HID 40TKS-00-000000, please contact us.
1 Review
-
HID-40TKS-00-000000