
Glynn Johnson 904H-US32D
-
MPN: 904H-US32D
-
JMAC ID: 200192679
The Glynn Johnson 904H-US32D is a hold-open surface overhead door holder/stop. The unit can be used in conjunction with most surface-applied door closers. The provided templates allow for variable mounting positions, ranging from 85 to 110 Hold-Open/Stop angle. These templates are designed for installation in almost all types of doors, including doors with conventional butt-type hinges or specialty hinges.
Hold-Open models provide a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. The Hold-Open function can easily be turned on or off by simply rotating the serrated knob on the bottom of the channel. This knob engages the Hold-Open mechanism, allowing the door to be held open at a predetermined position ranging from 85 to 110. When the knob is flipped over, it acts as a stop and shock absorber.
The tension on the Hold-Open mechanism can be adjusted using a phillips screwdriver to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located on the top of the slider in the channel.
The 904H-US32D features a satin stainless steel finish and is designed for door openings ranging from 33-1/16" to 39".
Also known as: 904HUS32D
For more information about the Glynn Johnson 904H-US32D, please contact us.
Hold-Open models provide a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. The Hold-Open function can easily be turned on or off by simply rotating the serrated knob on the bottom of the channel. This knob engages the Hold-Open mechanism, allowing the door to be held open at a predetermined position ranging from 85 to 110. When the knob is flipped over, it acts as a stop and shock absorber.
The tension on the Hold-Open mechanism can be adjusted using a phillips screwdriver to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located on the top of the slider in the channel.
The 904H-US32D features a satin stainless steel finish and is designed for door openings ranging from 33-1/16" to 39".
Also known as: 904HUS32D
Technical Specifications:
|
For more information about the Glynn Johnson 904H-US32D, please contact us.
- Improved Corrosion Resistance
- Non-Handed
- Improved Compatibility with Door Closers
- Single-Acting Doors
- Interior/Exterior Applications
- Durable
- Easy to Install
- Function Conversion Kits Available
2 Reviews
-
GLYNN-904H-US32D
-
GLYNN-904H-US32D