Global Cache IP2SL-P iTach PoE IP to RS232 Serial Adapter
-
MPN: IP2SL-P
-
JMAC ID: 200408459
The Global Cach IP2SL-P is an iTach Ethernet-to-RS-232 serial adapter designed to connect serial-controlled equipment to wired TCP/IP automation networks. Featuring 802.3af Power over Ethernet (PoE), a 10/100 Mbps RJ45 network connection, and one bidirectional male DB9 serial port, the module supports communication speeds from 1,200 to 115,200 baud. Its integrated web server, eight simultaneous network connections, and compact aluminum enclosure support remote control of compatible AV equipment, displays, and automation systems.
Global Cach IP2SL-P iTach TCP/IP to RS-232 Serial Adapter with Power over Ethernet
The Global Cach IP2SL-P iTach Ethernet-to-Serial Adapter provides network connectivity for equipment that communicates through an RS-232 serial interface, allowing compatible devices to be controlled and monitored through wired Ethernet automation systems. Designed for residential automation, commercial AV installations, conference rooms, educational facilities, and integrated building control applications, the IP2SL-P converts TCP/IP network communication into bidirectional RS-232 serial communication without requiring the connected equipment to have a native Ethernet port. Its 802.3af-compliant Power over Ethernet capability allows the adapter to receive electrical power and network connectivity through a single Ethernet cable connected to a compatible PoE switch or injector. The module supports integration with control systems, computers, and compatible third-party automation applications that communicate using Global Cach 's TCP command interface. Typical applications include network control of projectors, professional displays, audio processors, video switchers, and motorized window shades equipped with compatible RS-232 control ports.
The Global Cach IP2SL-P features one male DB9 RS-232 serial port and one RJ45 10/100 Mbps Ethernet interface, supporting full-duplex network communication and bidirectional transmission of serial commands and responses. Its serial interface accommodates data rates from 1,200 to 115,200 baud, with configurable odd, even, or no parity and hardware RTS/CTS flow control. These settings allow the adapter to communicate with equipment requiring different serial connection parameters. The IP2SL-P supports up to eight simultaneous TCP/IP connections, enabling compatible network controllers and applications to access its communication interface. The device incorporates an integrated configuration web server and support for TCP, DHCP, and HTTP networking standards. Its enclosure measures 3.25 inches long x 2.25 inches deep x 1.25 inches high (83 x 57 x 32 mm) and weighs approximately 3.25 ounces (92 g). The compact housing combines an aluminum extrusion body, rubber end caps, and molded plastic faceplates. In addition to PoE, the iTach family supports compatible external DC power and USB power cable arrangements, providing installation flexibility where PoE infrastructure is unavailable.
The Global Cach IP2SL-P enables remote command transmission and serial response monitoring through compatible network-based automation software and control platforms. An integrated TCP/IP interface allows authorized control applications to send serial commands to connected equipment and receive responses from devices supporting bidirectional RS-232 communication. The module accommodates hardware RTS/CTS flow control and configurable serial communication parameters, supporting equipment with different baud rate, parity, and handshake requirements. Global Cach provides an open TCP command interface for integrating iTach devices with compatible third-party software, control processors, and automation applications. The iHelp discovery utility identifies connected iTach devices by IP address and MAC address, while the built-in web interface allows installers to configure networking and serial communication settings. The adapter also supports field-upgradeable firmware for manufacturer-provided updates. Unlike the Global Cach IP2IR-P, which provides infrared control outputs, or the IP2CC-P, which supplies contact closure relays, the IP2SL-P is specifically designed for RS-232 serial communication and does not include dedicated IR output or relay control terminals.
Installation of the Global Cach IP2SL-P iTach Serial Control Module requires a wired Ethernet connection and a compatible RS-232 connection to the equipment being controlled. Installers connect the RJ45 network port to a 10/100 Mbps Ethernet network and attach the male DB9 serial connector to the equipment's corresponding serial port using a properly wired cable or adapter. When connected to an IEEE 802.3af-compliant PoE switch or injector, the device receives its operating power through the Ethernet connection without requiring a separate power adapter. In its default configuration, the iTach uses DHCP to obtain an IP address automatically; when a DHCP server is unavailable, the manufacturer's quick start documentation identifies 192.168.1.70 as the default address. The downloadable iHelp utility simplifies network discovery and provides access to the embedded configuration pages, where installers can adjust the network address, baud rate, parity, stop bits, and serial flow control settings to match the connected device. Power and communication activity LEDs assist with basic connection diagnostics. The IP2SL-P complies with FCC Part 15 Class B, CE, and RoHS requirements and is covered by a two-year limited manufacturer warranty. Proper integration requires verification of DB9 pin assignments, serial cable wiring, network connectivity, and command compatibility with the equipment manufacturer's RS-232 protocol documentation.
UPC: 810466010228
Also known as: IP2SLP
For more information about the Global Cache IP2SL-P, please contact us.
- PoE enabled
- TCP/IP-to-Contact Closure Relay
1 Review
-
GLOBAL-CACHE-IP2SL-P