Global Cache IP2CC-P - iTach TCP/IP to Contact Closure

The Global Cach IP2CC-P is an iTach Ethernet-to-contact-closure controller with IEEE 802.3af Power over Ethernet (PoE), three independently controlled relays, and 10/100 Mbps wired network connectivity. Designed for home automation, commercial AV integration, and low-voltage equipment control, it features three normally open relay outputs rated at 24 VAC/VDC and 0.5 amps each, pluggable screw terminals, and transient voltage suppression. Its integrated web server, TCP/IP command interface, and support for eight simultaneous connections enable network-based control of compatible garage doors, motorized shades, lighting systems, and other relay-operated devices.

Global Cach IP2CC-P iTach Ethernet-to-Contact Closure Controller with PoE

The Global Cach IP2CC-P is a three-relay Ethernet-to-contact-closure controller with integrated Power over Ethernet (PoE), designed to connect conventional low-voltage equipment to IP-based automation and control systems. Part of the Global Cach iTach family, the IP2CC-P converts commands received over a wired TCP/IP network into physical relay contact closures, enabling compatible equipment to be operated remotely without replacing existing control hardware. The device features three independently controlled normally open (NO) relay outputs, allowing a single network interface to control up to three separate relay-operated functions. Common applications include activating garage door controllers, motorized window shades, lighting control interfaces, audiovisual equipment, and other devices equipped with suitable dry-contact inputs. Its compact design and open network communication architecture make it suitable for residential automation, commercial AV installations, conference rooms, equipment racks, and custom integration projects requiring reliable IP-to-relay control.

The IP2CC-P incorporates three integrated contact-closure relays, each rated for a maximum of 24 VAC or VDC at 0.5 amps. The relays provide electrically isolated, normally open switching contacts through removable screw-terminal connectors, enabling integration with compatible low-voltage control circuits. Built-in transient voltage suppression helps protect the relay interfaces from switching-related electrical disturbances. The controller uses a standard RJ45 10/100 Mbps Ethernet connection and supports TCP/IP, DHCP, and HTTP network protocols. Its open command interface allows automation software, networked controllers, and custom applications to activate individual relays, configure output behavior, and retrieve supported device information. The iTach platform supports up to eight simultaneous network connections, enabling communication with multiple authorized control applications. Commands are transmitted using the Global Cach TCP API, with the standard iTach command interface operating through TCP port 4998. These capabilities allow the IP2CC-P to function as a network-controlled relay interface for compatible third-party automation platforms and software integrations.

The Global Cach IP2CC-P features IEEE 802.3af-compliant Power over Ethernet, allowing both network communication and operating power to be supplied through a single Ethernet cable connected to a compatible PoE switch or injector. This configuration reduces the need for a separate local power adapter and simplifies placement near relay-controlled equipment, provided that suitable network wiring and PoE infrastructure are available. The device measures approximately 3.25 inches long, 2.25 inches wide, and 1.25 inches high (83 x 57 x 32 mm) and weighs approximately 3.25 ounces (92 grams). Its durable enclosure combines an aluminum extrusion body, rubber end caps, and protective plastic faceplates. Power and connector activity indicators provide visual feedback during installation and operation. An integrated web server allows installers to configure network settings through a browser, while Global Cach 's iHelp utility automatically discovers supported devices on the local network and displays their IP addresses and hardware identifiers. The controller also supports field-upgradeable firmware for manufacturer-issued updates and operational improvements.

The IP2CC-P is designed for integration with IP-based control systems requiring physical relay switching of compatible low-voltage equipment. Its TCP/IP interface allows control applications to issue relay commands over the local Ethernet network, while appropriately secured network infrastructure can support remote automation through external software or control gateways. Global Cach provides a published API for developers and system integrators, enabling custom relay control using standard network programming tools. Unlike the Global Cach IP2CC, which uses conventional external power, the IP2CC-P includes Power over Ethernet capability for simplified network-powered installation. The iTach product family also includes the IP2IR-P for infrared equipment control and IP2SL-P for RS-232 serial communication, allowing installers to select the appropriate interface for each device type. The IP2CC-P is identified in manufacturer documentation as FCC Part 15 Class B, CE, C-Tick, and RoHS compliant and carries a two-year limited manufacturer warranty. With three isolated contact-closure outputs, 802.3af PoE connectivity, compact construction, and support for open TCP/IP commands, the Global Cach IP2CC-P provides a flexible solution for connecting existing relay-controlled equipment to modern network automation systems.