516-812-0917
Help
Live Chat
Gentex GES24-15WR 24VDC Red Low-Profile 15 Candella Evacuation Strobe
-
MPN: GES24-15WR
-
JMAC ID: 200088398
The Gentex GES24-15WR is a 24VDC Low-Profile Evacuation Strobe.
The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available.
The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.
The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.
The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.
The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-Slide feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.
The Commander2 Series also features the Checkmate - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal.
The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.
Also known as: GN-9041165, GES2415WR
For more information about the Gentex GES24-15WR, please contact us.
The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available.
The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.
The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.
The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.
The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-Slide feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.
The Commander2 Series also features the Checkmate - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal.
The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.
Also known as: GN-9041165, GES2415WR
For more information about the Gentex GES24-15WR, please contact us.
- Switch for continuous or temporal 3 (not available on whoop tone)
- Faceplate available in red or off-white
- Silence horn while strobes remain flashing
- Surface mount with the GSB (Gentex Surface Mount Box)
- Tamperproof re-entrant grill
- Switch for chime, whoop, mechanical and 2400Hz tone
- Switch selection for high or low dBA
- Input terminals 12 to 18 AWG
- Documented lower installation and operating costs
- Prewire entire system, install mounting bracket, then install signals
- Synchronize strobe and/or horn with Gentex AVSM Control Module
- Unit Dimensions: 5” (12.7 cm) high x 4.5” (11.43 cm) wide x 2.5” (6.35 cm) deep
- Checkmate® - instant voltage verification
- Super-Slide® Bracket - ease of supervision testing
- GEH horn is available in 12VDC or 24VDC
- Fixed candela options of 15/75 and 177
- Nominal voltage 24VDC
Other products from Gentex
Customer Reviews
2 Reviews
-
GENTEX-GES24-15WR
-
GENTEX-GES24-15WR
