GRI 4402-A Industrial Surface Mount Switch Set, Wide Gap, SPDT
-
MPN: 4402-A
-
JMAC ID: 200204559
The GRI 4402-A is a heavy-duty industrial magnetic contact switch designed for monitoring overhead garage doors, chain-link gates, safes, and other secured openings. Featuring a 2-1/2-inch standard operating gap, Form C (SPDT) switch contacts, and a 36-inch stainless steel armored cable, the sensor supports normally open and normally closed alarm circuits. Its weather-resistant aluminum housing provides protection in demanding environments, while the surface-mount design simplifies installation. The 4402-A is UL and ULC listed and includes mounting hardware for commercial security applications.
GRI 4402-A Industrial Wide-Gap Magnetic Contact with Armored Cable
The George Risk Industries 4402-A Industrial Magnetic Contact is a heavy-duty, surface-mounted security switch designed to monitor the open and closed positions of commercial doors, chain-link gates, overhead garage doors, safes, and walk-in freezer doors. Part of GRI's 4400 Series, the sensor combines a 2-1/2-inch (63.5 mm) standard operating gap with a weather-resistant aluminum enclosure, accommodating installations where conventional narrow-gap magnetic contacts may not provide sufficient clearance. The 4402-A uses a Form C single-pole double-throw (SPDT) reed switch to provide both normally open and normally closed alarm circuit connections. Its rugged construction supports industrial intrusion detection applications requiring reliable mechanical mounting and protected wiring.
The 4402-A incorporates a Form C changeover contact rated for 5 watts maximum switching power, 175 VDC maximum switching voltage, and 0.25 amperes maximum switching current. The manufacturer specifies a maximum initial contact resistance of 0.140 ohms, supporting low-resistance signal transmission to compatible intrusion alarm control panels. Its SPDT configuration provides common, normally closed, and normally open connections, allowing installers to select the appropriate circuit arrangement for the connected alarm system. The standard 4402-A includes a 36-inch stainless steel armored cable that protects the conductors against mechanical damage. The magnetic reed switch operates without a dedicated power supply, while the connected alarm panel monitors changes in contact state as the magnet moves away from the switch.
The GRI 4402-A wide-gap magnetic contact features a weather-resistant aluminum switch housing and matching magnet assembly designed for surface mounting. The manufacturer specifies a housing length of 2.60 inches (66 mm), with mounting holes positioned approximately 2.30 inches apart. The switch and magnet housings provide a durable mounting arrangement for metal gates, overhead door frames, industrial equipment enclosures, and other secured openings. The 4400 Series supports operating temperatures from -40 F to 257 F (-40 C to 125 C), making the contact suitable for applications involving substantial temperature variation. Optional accessories include the GRI 5226 case spacer and 8297 garage door track mounting kit, while custom armored cable lengths and vinyl-jacketed CL-2 cable configurations are available by special request.
The GRI 4402-A industrial surface-mount contact switch integrates with compatible hardwired intrusion detection systems to provide door and gate position monitoring. Installation requires securing the switch to a stationary surface, positioning the magnet on the moving door or gate, and maintaining proper alignment within the specified 2-1/2-inch operating gap. The armored cable connects the switch contacts to the alarm control panel, with wiring selected according to the required normally open or normally closed circuit configuration. GRI offers optional end-of-line resistors, diodes, and supervisory loop configurations for specialized alarm system requirements; these features are not standard unless specifically ordered. The 4402-A carries UL and ULC approvals and is backed by George Risk Industries' lifetime warranty against defects in materials and workmanship, supporting long-term installation in commercial and industrial security applications.
UPC: 697625008476
Also known as: GI-4402A, GRI-4402A, 4402A
Technical Specifications:
|
For more information about the GRI 4402-A, please contact us.
- Lifetime Warranty
- Switches or magnets are available separately
- Supervisory loops available
- Longer leads or jacketed cable on request
- Ideal for securing chain link fence
- Variety of optional mounting brackets available
- Weather resistant aluminum housing
- 3' standard lead length
- Wide gap of 2 1/2"+
- Armored or jacketed cable
- UL and ULC approved
- SPDT
2 Reviews
-
GRI-4402-A
-
GRI-4402-A