Elk MM443

MPN: MM443
JMAC ID: 200277923

$181.00

+ Free Shipping

JMAC_ID:: 200277923
df_manual_boost:: 1.75

Product Resources

ELKMM443 Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

The ELK-MM443 is a 4 input/4 output programmable controller used in a wide array of applications, including timers, door controllers, simple process controllers, and multiple zone security controls.

The MM443 can be used as a networked controlled, and it is programmed by a personal computer.

UPC: 762158504433
Also known as: EK-MM443

Technical Specifications:

Enclosure: White Plastic: 6.5" W x 4.375"H x 2"D
Data Bus: RS-485, max bus length: 4000 feet w/22 AWG wire
Current Draw: 10 ma. Nominal, 130 ma. Maximum with all relays active
Operating Voltage: 9.5-15 Volts DC
Inputs: 4 Analog, 0 to 13.6 volts, with jumper programmable 2k pull up resistor to 12 V, or 2k pull down resistor to ground. May be left floating. Software programmable high and low threshold levels per input for end-of-line resistor circuits. Input impedance (floating input) - 100K ohms

For more information about the Elk MM443, please contact us.

Lifetime Limited Warranty
Four analog or digital inputs
Four relay outputs (2 relay outputs may be jumper programmed for transistor open collector outputs)
16,384 program bytes using SIMPLE programming language
4 general purpose Counters, range 0 to 255 counts
4 general purpose Timers, range 1/10 second to over 255 hours
Networked to optional PC and up to 31 ELK-MM443’s through a RS-485 data bus
X-10® Power Line Carrier Interface. PL513, PSC04 (Transmit Only), or TW523, PSC05 (Two Way)
Analog transmission MM443 to MM443 and Preset Dim Commands
Dallas iButton™ TouchKey Reader with optional ELK-MA100 or ELK-MA290 interface
Programs the ELK-MM220 (two inputs, two relay outputs)
Emulates ELK-MM220 for code development
Program stored in non-volatile EEProm memory
Mounts to single or double gang electrical box
Optional DIN Rail Mounting. PCB mounts into 4 inch SnapTrack